{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX5183BEEI+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX5183BEEIT","canonicalUrl":"https://icboms.com/analog-devices/MAX5183BEEIT","factsUrl":"https://icboms.com/api/mcp/products/MAX5183BEEI%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX5183BEEI+T, 10-bit dual DAC, current-source architecture, unbuffered voltage output, 25µs settling, parallel interface, 28-QSOP package, -40°C to +85°C.","salesMarkdown":"## 10-bit dual DAC with current-source core The MAX5183BEEI+T is a 10-bit, dual digital-to-analog converter using a current-source architecture that drives an unbuffered voltage output. The 25 µs typical settling time means the output settles to within 1 LSB after a full-scale step in under one timer tick of a typical 48 MHz MCU — fast enough for waveform generation at audio rates or for updating a closed-loop setpoint in a motor-control loop without delaying the next PID cycle. ## Monotonicity and linearity over temperature That guarantees no missing codes at 10-bit resolution — the output is monotonic across all 1024 codes, so a calibration DAC or a trim pot replacement never sees a step backwards as the code increments. The reference can be either external or internal. With the internal reference, the full-scale range is set by the on-chip bandgap; using an external reference lets the user scale the output span to match the ADC input range or the actuator drive voltage without an external op-amp stage. ## Single-supply rail and package fit The parallel data interface writes all 10 bits in one bus cycle, so the update rate is limited only by the MCU's write strobe timing and the DAC's 25 µs settling. The 28-SSOP (0.154-inch body width, 3.90 mm height) and the 28-QSOP supplier package share the same footprint — the QSOP is a shorter-body variant that saves a few millimetres of board height. Both are surface-mount packages with 0.65 mm pitch, routable on a two-layer board with a 10-mil trace/space rule.","metaTitle":"MAX5183BEEI+T 10-Bit Dual DAC, 25µs Settling, 28-QSOP","metaDescription":"Active 10-bit dual DAC with current-source architecture, 25µs settling time, ±0.5 LSB INL. Parallel interface, unbuffered voltage output.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Microcontrollers & Processors (MCU / MPU / DSP)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Output Type":"Voltage - Unbuffered","Architecture":"Current Source","INL/DNL (LSB)":"±0.5, ±0.5","Mounting Type":"Surface Mount","Settling Time":"25µs (Typ)","Data Interface":"Parallel","Number of Bits":"10","Package / Case":"28-SSOP (0.154\\\", 3.90mm Width)","Reference Type":"External, Internal","lifecycle_stage":"eol_hot","Differential Output":"Yes","Operating Temperature":"-40°C ~ 85°C","Supplier Device Package":"28-QSOP","Number of D/A Converters":"2","Voltage - Supply, Analog":"2.7V ~ 3.3V","Voltage - Supply, Digital":"2.7V ~ 3.3V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10.99","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$10.99000","currency":"USD"},{"qty":10,"price":"$10.09700","currency":"USD"},{"qty":25,"price":"$9.67880","currency":"USD"},{"qty":100,"price":"$8.52780","currency":"USD"},{"qty":250,"price":"$8.10928","currency":"USD"},{"qty":500,"price":"$7.58612","currency":"USD"},{"qty":1000,"price":"$6.95829","currency":"USD"},{"qty":2500,"price":"$6.69670","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"What is the output type of the MAX5183BEEI+T?","answer":"Voltage - Unbuffered. The current-source architecture drives a resistor network that produces a voltage output directly — no internal buffer amplifier. The output impedance is resistive and should be loaded with a high-impedance input (e.g., an op-amp buffer) to avoid gain error."},{"question":"What package does the MAX5183BEEI+T come in?","answer":"The supplier device package is also listed as 28-QSOP — same footprint, shorter body length."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX5183BEEIT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX5183BEEIT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}