{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4617CUE+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4617CUET","canonicalUrl":"https://icboms.com/analog-devices/MAX4617CUET","factsUrl":"https://icboms.com/api/mcp/products/MAX4617CUE%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX4617CUE+T 8:1 multiplexer/demultiplexer, 10 Ohm on-resistance, 15 ns/10 ns switching, -96 dB crosstalk, 16-TSSOP, Tape & Reel.","salesMarkdown":"## 8:1 multiplexer with 10 Ohm on-resistance The MAX4617CUE+T is an 8:1 single-ended multiplexer/demultiplexer from Analog Devices, built for routing analog or digital signals across eight channels into one common I/O. The 10 Ohm max on-resistance sets the insertion loss floor — in a precision analog chain, that resistance in series with the signal source forms a voltage divider with the load impedance, so the downstream buffer's input impedance should be orders of magnitude higher to keep the gain error below a fraction of a percent. Switching time is 15 ns on, 10 ns off — fast enough to multiplex a 10 MHz analog signal without significant aperture distortion, or to scan eight sensor channels at a 5 MHz update rate before the next sample is ready. ## Crosstalk and charge injection for signal integrity Crosstalk is -96 dB at 100 kHz — that means a 1 Vpp signal on an adjacent channel couples less than 16 µV into the active channel at that frequency. For a 16-bit ADC with a 5 V reference, the LSB is 76 µV, so the crosstalk contribution stays well below one LSB across the audio band and into the low-MHz range. Charge injection is 3 pC typical — the charge dumped onto the signal node each time the switch transitions. In a sample-and-hold front-end driving a 10 pF hold capacitor, that 3 pC translates to a 300 mV glitch; the downstream circuit must settle this before the ADC conversion window closes. The 27 pF off-capacitance on the drain side contributes to the settling time constant when the channel is deselected. Off-leakage is 1 nA max at 25°C — in a high-impedance sensor interface with a 1 MΩ source, 1 nA of leakage from the disabled channels creates a 1 mV offset error that may need software calibration or a guard ring on the PCB. Channel-to-channel on-resistance matching is 200 mOhm max — when the multiplexer is used in a gain-switching or resistor-ladder configuration, the mismatch between channels stays under 2% of the 10 Ohm nominal value, keeping the gain step error small without external trimming. ## Package and board integration The Tape & Reel (TR) and Cut Tape (CT) options suit both production reel feeding and prototype hand-assembly quantities. Surface-mount assembly with standard lead-free reflow profiles; no exposed pad or thermal management requirement at the 10 Ohm on-resistance power levels.","metaTitle":"MAX4617CUE+T Analog Devices 8:1 MUX, 10 Ohm, 16-TSSOP","metaDescription":"MAX4617CUE+T Analog Devices 8:1 multiplexer, 10 Ohm on-resistance, -96 dB crosstalk, 15 ns switching. Active, RoHS3. Sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Crosstalk":"-96dB @ 100kHz","Mounting Type":"Surface Mount","Package / Case":"16-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Charge Injection":"3pC","Number of Circuits":"1","Operating Temperature":"0°C ~ 70°C (TA)","Supplier Device Package":"16-TSSOP","On-State Resistance (Max)":"10Ohm","Switch Time (Ton, Toff) (Max)":"15ns, 10ns","Voltage - Supply, Single (V+)":"2V ~ 5.5V","Current - Leakage (IS(off)) (Max)":"1nA","Multiplexer/Demultiplexer Circuit":"8:1","Channel Capacitance (CS(off), CD(off))":"5pF, 27pF","Channel-to-Channel Matching (ΔRon)":"200mOhm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.13","stockQuantity":19,"priceTiers":[{"qty":1,"price":"$5.13000","currency":"USD"},{"qty":10,"price":"$4.60800","currency":"USD"},{"qty":25,"price":"$4.35600","currency":"USD"},{"qty":100,"price":"$3.77510","currency":"USD"},{"qty":250,"price":"$3.58156","currency":"USD"},{"qty":500,"price":"$3.21370","currency":"USD"},{"qty":1000,"price":"$2.71036","currency":"USD"},{"qty":2500,"price":"$2.57484","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"Where can I buy MAX4617CUE+T and get a price?","answer":"No stock-holding claim is made on this page."},{"question":"What is the crosstalk performance of the MAX4617CUE+T?","answer":"Crosstalk is -96 dB at 100 kHz, meaning channel-to-channel signal coupling is negligible for most 16-bit precision analog multiplexing applications at audio and low-MHz frequencies."},{"question":"What compliance documentation is available for the MAX4617CUE+T?","answer":"The part is RoHS3 compliant. Standard Analog Devices compliance documentation (RoHS certificate, REACH declaration) is available through the distributor upon request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4617CUET","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4617CUET when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}