{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4614ESD+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4614ESDT","canonicalUrl":"https://icboms.com/analog-devices/MAX4614ESDT","factsUrl":"https://icboms.com/api/mcp/products/MAX4614ESD%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX4614ESD+T quad SPST-NO analog switch, 10 Ohm on-resistance, 70 MHz bandwidth, -96 dB crosstalk at 100 kHz, 14-SOIC package, Tape & Reel.","salesMarkdown":"## Quad SPST-NO switch with 10 Ohm Ron and 70 MHz bandwidth The MAX4614ESD+T: The 10 Ohm max on-resistance sets the signal attenuation floor — for a 50 Ohm system, the insertion loss is about 0.8 dB, which is manageable for most analog paths but worth budgeting in a precision chain. The -3 dB bandwidth of 70 MHz means the switch passes composite video and baseband signals up to that frequency with less than 3 dB roll-off. For a 10 MHz analog signal, the flatness is well within 0.1 dB, making this part suitable for video routing or high-speed data acquisition front-ends. Crosstalk is rated at -96 dB at 100 kHz — that is the isolation between adjacent channels when one is active and the other is off. In a multiplexed ADC input stage, this level of separation keeps the channel-to-channel bleed well below the noise floor of a 16-bit converter at moderate sampling rates. ## Switching speed and charge injection — timing and glitch budget Turn-on and turn-off times are 12 ns and 10 ns max respectively. For a multiplexed bus cycling between four channels at 10 MHz, the switching transient occupies about 12% of the period — the downstream sample-and-hold must settle after the break-before-make interval. The 6.5 pC charge injection is the amount of charge dumped onto the load when the switch toggles; in a 10 pF sampling capacitor, that translates to a 650 mV glitch, so the hold capacitor needs to be large enough to absorb it or the sample window must be delayed past the glitch. Channel-to-channel on-resistance matching is 200 mOhm max. In a gain-set resistor network or a precision attenuator, this mismatch contributes a gain error of about 0.2% across channels — acceptable for 8-bit systems but worth a calibration step for 12-bit or higher. ## Supply range and leakage — single-rail operation and high-impedance nodes Operates from a single supply between 2 V and 5.5 V. At 3.3 V the switch is fully specified; at 2 V the on-resistance rises but remains within the 10 Ohm max spec. The 1 nA max off-leakage current means the switch does not load high-impedance nodes — a 10 MOhm source sees less than 10 mV of offset from leakage, negligible for most sensor interfaces. Channel capacitance is 5 pF for both source and drain when off. This capacitance combines with the source impedance to form a low-pass filter — with a 10 kOhm source, the -3 dB corner is about 3.2 MHz, so the bandwidth of the signal path is limited by the source impedance, not the switch itself. ## Package and temperature grade — board-fit and deployment envelope Housed in a 14-SOIC package (0.154-inch body width, 3.90 mm) with a surface-mount footprint. The supplier device package is also 14-SOIC, so no footprint ambiguity. The 1.27 mm pin pitch is standard — no fine-pitch routing challenges, and the package is compatible with most automated optical inspection systems. This is the industrial temperature band — suitable for factory-floor equipment, outdoor telecom enclosures, and automotive cabin environments, but not for under-hood or engine-bay deployment where 125°C ambient is common. Available in Tape & Reel (TR) or Cut Tape (CT) — the TR format is feeder-ready for high-volume pick-and-place lines; CT suits prototype or low-volume builds without minimum reel commitment. RoHS3 compliant (2011/65/EU + 2015/863), so it ships without the six restricted substances plus the four phthalates.","metaTitle":"MAX4614ESD+T Analog Devices SPST Switch, 10 Ohm, 70 MHz","metaDescription":"MAX4614ESD+T quad SPST-NO analog switch from Analog Devices. 10 Ohm on-resistance, 70 MHz bandwidth, -96 dB crosstalk. Active production, RoHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Microcontrollers & Processors (MCU / MPU / DSP)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Crosstalk":"-96dB @ 100kHz","Mounting Type":"Surface Mount","-3db Bandwidth":"70MHz","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","Switch Circuit":"SPST - NO","lifecycle_stage":"eol_hot","Charge Injection":"6.5pC","Number of Circuits":"4","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"14-SOIC","On-State Resistance (Max)":"10Ohm","Switch Time (Ton, Toff) (Max)":"12ns, 10ns","Voltage - Supply, Single (V+)":"2V ~ 5.5V","Current - Leakage (IS(off)) (Max)":"1nA","Multiplexer/Demultiplexer Circuit":"1:1","Channel Capacitance (CS(off), CD(off))":"5pF, 5pF","Channel-to-Channel Matching (ΔRon)":"200mOhm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.39","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$4.39000","currency":"USD"},{"qty":10,"price":"$3.94200","currency":"USD"},{"qty":25,"price":"$3.72680","currency":"USD"},{"qty":100,"price":"$3.23000","currency":"USD"},{"qty":250,"price":"$3.06432","currency":"USD"},{"qty":500,"price":"$2.74962","currency":"USD"},{"qty":1000,"price":"$2.31896","currency":"USD"},{"qty":2500,"price":"$2.20301","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/443a33c6926ca9b5d7dbadfe65df2880.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the on-resistance and bandwidth of MAX4614ESD+T?","answer":"The MAX4614ESD+T has a maximum on-resistance of 10 Ohm and a -3 dB bandwidth of 70 MHz. The 10 Ohm Ron sets the insertion loss floor, and the 70 MHz bandwidth passes composite video and baseband signals up to that frequency."},{"question":"What package does MAX4614ESD+T come in?","answer":"The MAX4614ESD+T is offered in a 14-SOIC package (0.154-inch body width, 3.90 mm) with surface-mount mounting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4614ESDT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4614ESDT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}