{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4614ESD+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4614ESD","canonicalUrl":"https://icboms.com/analog-devices/MAX4614ESD","factsUrl":"https://icboms.com/api/mcp/products/MAX4614ESD%2B","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX4614ESD+, quad SPST-NO analog switch, 10 Ohm on-resistance, 70 MHz -3dB bandwidth, -96 dB crosstalk at 100 kHz, 14-SOIC package, tube.","salesMarkdown":"## Quad SPST analog switch for signal routing The MAX4614ESD+ from Analog Devices (formerly Maxim Integrated) is a quad single-pole single-throw normally-open analog switch in a 14-SOIC package. Each of the four independent switches handles rail-to-rail analog signals with a maximum on-resistance of 10 Ohm, making it suitable for audio line-level switching, data acquisition front-ends, and general-purpose analog multiplexing. The -3dB bandwidth of 70 MHz and crosstalk of -96 dB at 100 kHz keep channel separation clean for multi-channel audio or low-frequency instrumentation paths. ## Supply voltage and logic compatibility Runs on a single supply from 2 V to 5.5 V, so it works directly on both rails without a level translator. The switch control inputs are TTL/CMOS-compatible across that range, simplifying the interface to an MCU GPIO or FPGA bank. ## Switching speed and charge injection Turn-on time is 12 ns max, turn-off 10 ns max — fast enough for sample-and-hold or high-speed analog muxing in test equipment. Charge injection is 6.5 pC typical, which matters if you are switching into a high-impedance node where glitch energy could disturb a precision ADC input. ## Package and footprint Housed in a 14-SOIC (0.154\" body width, 3.90 mm width) surface-mount package. The supplier device package is 14-SOIC. Shipped in tube — if you need tape-and-reel for automated assembly, confirm the reel suffix with your distributor before ordering. ## Temperature range and environment Rated for industrial temperature operation from -40°C to +85°C ambient. Suitable for factory-floor instrumentation, telecom line cards, and outdoor-edge equipment that sees temperature swings but not extended under-hood automotive conditions.","metaTitle":"MAX4614ESD+ Analog Switch IC, SPST-NO x4, 10Ohm, 14-SOIC","metaDescription":"MAX4614ESD+ quad SPST analog switch from Analog Devices. 10 Ohm on-resistance, 70MHz bandwidth, -96dB crosstalk. Active production, 14-SOIC package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tube","Crosstalk":"-96dB @ 100kHz","Mounting Type":"Surface Mount","-3db Bandwidth":"70MHz","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","Switch Circuit":"SPST - NO","lifecycle_stage":"eol_hot","Charge Injection":"6.5pC","Number of Circuits":"4","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"14-SOIC","On-State Resistance (Max)":"10Ohm","Switch Time (Ton, Toff) (Max)":"12ns, 10ns","Voltage - Supply, Single (V+)":"2V ~ 5.5V","Current - Leakage (IS(off)) (Max)":"1nA","Multiplexer/Demultiplexer Circuit":"1:1","Channel Capacitance (CS(off), CD(off))":"5pF, 5pF","Channel-to-Channel Matching (ΔRon)":"200mOhm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.47","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$4.47000","currency":"USD"},{"qty":10,"price":"$4.01400","currency":"USD"},{"qty":25,"price":"$3.79520","currency":"USD"},{"qty":100,"price":"$3.28910","currency":"USD"},{"qty":250,"price":"$3.12040","currency":"USD"},{"qty":500,"price":"$2.79992","currency":"USD"},{"qty":1000,"price":"$2.36138","currency":"USD"},{"qty":2500,"price":"$2.24331","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/443a33c6926ca9b5d7dbadfe65df2880.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the on-resistance of MAX4614ESD+ and is it suitable for audio?","answer":"Maximum on-resistance is 10 Ohm. For line-level audio switching (e.g., 2 Vrms signals into 10 kOhm loads), the 10 Ohm Ron adds negligible attenuation and distortion, making it a practical choice for audio routing in mixers, preamps, and test gear."},{"question":"Can MAX4614ESD+ work with both 3.3V and 5V supply?","answer":"Yes, the single-supply range is 2 V to 5.5 V, so it operates on either 3.3 V or 5 V rails without modification."},{"question":"Where can I buy MAX4614ESD+?","answer":"This part is sourced and quoted to order through independent distribution. Submit an RFQ for current availability and pricing — stock levels and lead time are confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4614ESD","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4614ESD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}