{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4602CPE+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4602CPE","canonicalUrl":"https://icboms.com/analog-devices/MAX4602CPE","factsUrl":"https://icboms.com/api/mcp/products/MAX4602CPE%2B","rawCanonicalId":null},"summary":{"shortDescription":"Maxim MAX4602CPE+, quad SPST-NO analog switch, 2.5Ohm max on-resistance, 4.5V to 36V single or ±4.5V to ±20V dual supply, 250ns/350ns switching, 16-pin DIP through-hole, 0°C to 70°C commercial temperature range.","salesMarkdown":"The Maxim MAX4602CPE+ is a quad SPST-NO analog switch in a 16-pin DIP package. Each of the four switches closes when the control pin is driven high, with a 1:1 multiplexer/demultiplexer configuration. The headline spec is the 2.5 Ohm maximum on-resistance — low enough to pass precision analog signals with minimal voltage drop, but not so low that you would use it for power switching. It runs on a single supply from 4.5V to 36V, or a dual supply from ±4.5V to ±20V, which makes it a natural fit for ±15V analog backplanes common in industrial signal conditioning and lab instrumentation. The through-hole DIP package is a field-service advantage — it sockets into standard 0.300-inch 16-pin DIP sockets, so you can swap it on site with a puller and a thumb, no hot-air station required. The 250 ns turn-on and 350 ns turn-off times keep up with moderate-speed analog multiplexing, audio crosspoint switching, and relay-replacement applications where mechanical contacts wear out. ## Supply range and signal handling The dual-supply capability is the key flexibility feature. If your board already has ±15V rails for op-amps, this switch drops straight in without a charge pump. Running single-supply at 12V or 24V is equally valid — the switch handles the full rail-to-rail analog swing. Crosstalk is -59 dB at 1 MHz. Charge injection is 120 pC. It belongs in indoor test equipment, bench-top instruments, audio gear, and office-environment control boards. Do not plan on using it in an engine bay, an outdoor telecom cabinet, or a rooftop sensor node without a heated enclosure — the silicon is not rated for that.","metaTitle":"MAX4602CPE+ Analog Switch, SPST-NO, 2.5Ohm, 16-DIP","metaDescription":"Maxim MAX4602CPE+ quad SPST-NO analog switch, 2.5Ohm max on-resistance, ±4.5V to ±20V dual supply, 16-DIP through-hole. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Package":"Tube","Crosstalk":"-59dB @ 1MHz","Mounting Type":"Through Hole","Package / Case":"16-DIP (0.300\\\", 7.62mm)","Switch Circuit":"SPST - NO","lifecycle_stage":"eol_hot","Charge Injection":"120pC","Number of Circuits":"4","Operating Temperature":"0°C ~ 70°C (TA)","Supplier Device Package":"16-PDIP","On-State Resistance (Max)":"2.5Ohm","Voltage - Supply, Dual (V±)":"±4.5V ~ 20V","Switch Time (Ton, Toff) (Max)":"250ns, 350ns","Voltage - Supply, Single (V+)":"4.5V ~ 36V","Current - Leakage (IS(off)) (Max)":"500pA","Multiplexer/Demultiplexer Circuit":"1:1","Channel Capacitance (CS(off), CD(off))":"55pF, 55pF","Channel-to-Channel Matching (ΔRon)":"100mOhm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$16.46","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$16.46000","currency":"USD"},{"qty":10,"price":"$15.12700","currency":"USD"},{"qty":25,"price":"$14.49960","currency":"USD"},{"qty":100,"price":"$12.77530","currency":"USD"},{"qty":250,"price":"$12.14828","currency":"USD"},{"qty":500,"price":"$11.36452","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/4d707b34f9e84a7585bc3a4b37c89fc2.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the on-resistance of MAX4602CPE+?","answer":"Maximum on-resistance is 2.5 Ohms per switch, with channel-to-channel matching of 100 milliohms typical."},{"question":"Can MAX4602CPE+ handle dual supply voltages?","answer":"Yes, it accepts dual supplies from ±4.5V to ±20V, or a single supply from 4.5V to 36V."},{"question":"Can I use MAX4602CPE+ for audio switching?","answer":"Yes, for line-level audio. The 2.5 Ohm on-resistance and -59 dB crosstalk at 1 MHz are adequate for 12-bit audio paths and analog crosspoint switching, though charge injection of 120 pC may cause a click if the output is not muted during switching."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4602CPE","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4602CPE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}