{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4595EXK+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4595EXKT","canonicalUrl":"https://icboms.com/analog-devices/MAX4595EXKT","factsUrl":"https://icboms.com/api/mcp/products/MAX4595EXK%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Maxim Integrated MAX4595EXK+T, SPST-NC analog switch, single circuit, 10 Ohm max on-resistance, 300 MHz -3dB bandwidth, 2V to 5.5V single supply, SC-70-5 package, -40°C to 85°C operation.","salesMarkdown":"## What this SPST-NC switch does on your board The Maxim Integrated MAX4595EXK+T is a single-pole single-throw normally-closed analog switch in a 5-pin SC-70-5 package. It routes one signal path that is closed when the control pin is low, opening when driven high. ## Signal path performance at a glance The 10 Ohm max on-resistance (R_on) is low enough to pass an analog signal with minimal voltage drop when the load impedance is high, typical of op-amp inputs or ADC drivers. The 300 MHz bandwidth means the switch doesn't roll off signals below that frequency — useful for video, fast serial data, or IF paths. ## Precision specs for sensitive circuits Off-leakage current maxes at 500 pA, so when the switch is open it doesn't bleed signal into the output node — important for high-impedance sensor inputs or integrator stages. Charge injection of 2 pC is the amount of charge dumped onto the signal line each time the switch toggles; in a sample-and-hold this translates to a voltage step that must settle before the ADC conversion. Both numbers are competitive for a general-purpose analog switch in this package size. ## Package and temperature range The SC-70-5 (SOT-353) footprint is compact, fitting into dense mixed-signal layouts. The -40°C to 85°C operating range covers industrial and telecom environments without needing a wider-temperature variant. ## Lifecycle and compliance The MAX4595EXK+T is listed as Active in production and ROHS3 compliant. No end-of-life notice or last-time-buy schedule is in effect. For new designs or BOM maintenance, this part is available through independent distribution and is sourced to order against an RFQ.","metaTitle":"MAX4595EXK+T SPST-NC Analog Switch, 10 Ohm, SC-70-5","metaDescription":"Maxim Integrated MAX4595EXK+T single SPST-NC analog switch, 10 Ohm on-resistance, 300 MHz bandwidth, 2V to 5.5V supply. ROHS3 compliant, SC-70-5.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Mounting Type":"Surface Mount","-3db Bandwidth":"300MHz","Package / Case":"5-TSSOP, SC-70-5, SOT-353","Switch Circuit":"SPST - NC","lifecycle_stage":"eol_hot","Charge Injection":"2pC","Number of Circuits":"1","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"SC-70-5","On-State Resistance (Max)":"10Ohm","Switch Time (Ton, Toff) (Max)":"35ns, 40ns","Voltage - Supply, Single (V+)":"2V ~ 5.5V","Current - Leakage (IS(off)) (Max)":"500pA","Multiplexer/Demultiplexer Circuit":"1:1","Channel Capacitance (CS(off), CD(off))":"8pF, 8pF"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.41","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.41000","currency":"USD"},{"qty":10,"price":"$2.16800","currency":"USD"},{"qty":25,"price":"$2.04520","currency":"USD"},{"qty":100,"price":"$1.74260","currency":"USD"},{"qty":250,"price":"$1.63620","currency":"USD"},{"qty":500,"price":"$1.43168","currency":"USD"},{"qty":1000,"price":"$1.18624","currency":"USD"},{"qty":2500,"price":"$0.98172","currency":"USD"},{"qty":5000,"price":"$0.94536","currency":"USD"}]},"links":{"datasheetUrl":"https://datasheets.maximintegrated.com/en/ds/MAX4594-MAX4597.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is MAX4595EXK+T ROHS compliant?","answer":"Yes, it is ROHS3 compliant."},{"question":"Can I use MAX4595EXK+T in audio applications?","answer":"The 300 MHz bandwidth and 10 Ohm on-resistance are sufficient for line-level audio switching. The 2 pC charge injection may produce an audible click if toggled during playback; use a mute-before-break scheme or a series resistor to reduce the transient."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4595EXKT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4595EXKT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}