{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4464EXK+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4464EXKT","canonicalUrl":"https://icboms.com/analog-devices/MAX4464EXKT","factsUrl":"https://icboms.com/api/mcp/products/MAX4464EXK%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX4464EXK+T, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 40 kHz GBW, 0.02V/µs slew rate, 750 nA supply, SC-70-5 package, -40°C to 85°C.","salesMarkdown":"## Micropower op-amp for always-on sensing The MAX4464EXK+T is a single-channel general-purpose operational amplifier from Analog Devices, built for applications where supply current is the tightest budget line. Its 750 nA quiescent current lets it sit on a battery rail without a load switch — think portable gas detectors, continuous battery monitoring, or wearable sensor front-ends where a microamp matters. The 40 kHz gain-bandwidth product and 0.02 V/µs slew rate confirm this is a low-frequency signal conditioner, not a loop compensator or audio driver. Rail-to-rail output keeps the swing clean at the 1.8 V minimum supply, so a single Li-ion cell or two alkaline cells power the whole stage without a boost converter. ## Supply voltage and temperature — where it fits Rated from 1.8 V to 5.5 V, the MAX4464EXK+T covers the common portable and industrial supply rails without a secondary regulator. The -40°C to 85°C operating range qualifies it for outdoor telecom enclosures, automotive cabin modules, and factory-floor sensor interfaces — not under-hood, but fine for the conditioned environment inside a panel or handheld instrument. Input offset voltage is 500 µV, and input bias current is 200 pA, both adequate for DC-accurate conditioning of thermocouple or bridge signals when the signal bandwidth stays under a few kilohertz. ## Package and footprint Housed in a 5-lead SC-70-5, the part fits into the same footprint as the industry-standard SOT-353. The SC-70 is roughly half the board area of an SOT-23-5 — useful when the sensor amplifier shares a cramped multi-layer board with the MCU and radio. Surface-mount only; the Tape & Reel option suits automated pick-and-place for medium-to-high volume builds. ## Lifecycle and sourcing Marked as Active and ROHS3 compliant. No NRND or EOL notice on record. The part is sourced through independent distribution and quoted to order against an RFQ.","metaTitle":"MAX4464EXK+T General Purpose Op-Amp, 40 kHz GBW, SC-70-5","metaDescription":"MAX4464EXK+T general purpose op-amp from Analog Devices. 40 kHz GBW, 750 nA supply, rail-to-rail output, SC-70-5 package. Active, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.02V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"5-TSSOP, SC-70-5, SOT-353","lifecycle_stage":"eol_hot","Current - Supply":"750nA","Number of Circuits":"1","Current - Input Bias":"200 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"40 kHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"SC-70-5","Current - Output / Channel":"36 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.27","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.27000","currency":"USD"},{"qty":10,"price":"$2.04000","currency":"USD"},{"qty":25,"price":"$1.92480","currency":"USD"},{"qty":100,"price":"$1.64010","currency":"USD"},{"qty":250,"price":"$1.54000","currency":"USD"},{"qty":500,"price":"$1.34750","currency":"USD"},{"qty":1000,"price":"$1.15500","currency":"USD"},{"qty":2500,"price":"$1.15500","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/max4464-max4474.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Where can I buy MAX4464EXK+T?","answer":"This part is sourced through independent distribution channels. Submit an RFQ for current pricing and availability — confirmed at quote time."},{"question":"Can MAX4464EXK+T be used as a comparator?","answer":"It is a general-purpose op-amp, not a comparator. The 0.02 V/µs slew rate and lack of a dedicated open-collector or push-pull output stage make it unsuitable for fast comparator applications. Use a dedicated comparator for threshold detection."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4464EXKT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4464EXKT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}