{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4252EBL+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4252EBLT","canonicalUrl":"https://icboms.com/analog-devices/MAX4252EBLT","factsUrl":"https://icboms.com/api/mcp/products/MAX4252EBL%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Maxim Integrated MAX4252EBL+T, General Purpose Amplifier, 2 Circuits, Rail-to-Rail, 3 MHz GBW, 0.3 V/µs slew rate, 70 µV offset, 2.4 V to 5.5 V supply, 8-UCSP package.","salesMarkdown":"## 3 MHz GBW at 420 µA — the power/speed trade-off that matters The MAX4252EBL+T is a dual general-purpose op-amp from Maxim Integrated, packing two rail-to-rail output channels into an 8-UCSP (1.6x1.6 mm) package. Its 3 MHz gain-bandwidth product at 420 µA per channel puts it in the sweet spot for low-frequency signal conditioning where you need bandwidth without burning the battery budget. The 70 µV input offset and 0.1 pA bias current mean you don't lose DC accuracy to the front end, even with high-impedance sensors. ## Slew rate and output drive — what the 0.3 V/µs number actually limits At 0.3 V/µs, this part isn't chasing fast edges. A full 5 V swing takes about 17 µs, so it's fine for audio, sensor filtering, or control loops, but not for pulse-width modulation or high-speed comparator outputs. Each channel can source or sink 68 mA, enough to drive a headphone or a small relay coil directly, though the thermal limits of the tiny UCSP package will be the real ceiling at continuous high current. ## Package realities for the rework bench The 8-UCSP (1.6x1.6 mm) is a wafer-level chip-scale package — no leads, just solder bumps on the bottom. That means the board footprint is the die size plus a few tenths of a millimeter. Replacing one without a hot-air station and a microscope is not happening. Active lifecycle status means no end-of-life surprise for a current design.","metaTitle":"MAX4252EBL+T General Purpose Op-Amp, 3 MHz GBW, 8-UCSP","metaDescription":"MAX4252EBL+T dual rail-to-rail op-amp with 3 MHz gain-bandwidth, 420 µA supply per channel, 70 µV offset. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.3V/µs","Output Type":"Push-Pull, Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-WFBGA, CSPBGA","lifecycle_stage":"eol_hot","Current - Supply":"420µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"0.1 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"70 µV","Supplier Device Package":"8-UCSP (1.6x1.6)","Current - Output / Channel":"68 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.4 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.86","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.86000","currency":"USD"},{"qty":10,"price":"$2.57000","currency":"USD"},{"qty":25,"price":"$2.42480","currency":"USD"},{"qty":100,"price":"$2.06610","currency":"USD"},{"qty":250,"price":"$1.94000","currency":"USD"},{"qty":500,"price":"$1.69750","currency":"USD"},{"qty":1000,"price":"$1.45500","currency":"USD"},{"qty":2500,"price":"$1.45500","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/538c0a545fa71e0621c641847bca45c7.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is MAX4252EBL+T suitable for battery-powered applications?","answer":"Yes. The 420 µA supply current per channel and 2.4 V minimum supply make it a strong fit for 3 V or single-cell Li-ion designs. The rail-to-rail output preserves dynamic range at low supply voltages. The 0.3 V/µs slew rate is adequate for audio and slow sensor signals, but not for high-speed ADC driving."},{"question":"What are the alternatives to MAX4252EBL+T?","answer":"Within the same family, the MAX4252ESA comes in an 8-SOIC package — same electrical specs, larger footprint, easier to rework. The MAX4252EUK+T is a single-channel version in SOT-23-5. Both are active and share the same 3 MHz GBW, 420 µA supply, and 70 µV offset. For a pin-compatible drop-in, the UCSP package is unique to the EBL+T variant; no direct second-source exists with the same bump layout."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4252EBLT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4252EBLT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}