{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX407ESA+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX407ESAT","canonicalUrl":"https://icboms.com/analog-devices/MAX407ESAT","factsUrl":"https://icboms.com/api/mcp/products/MAX407ESA%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Maxim Integrated MAX407ESA+T, dual general-purpose op amp, 8 kHz gain-bandwidth product, 1µA supply per channel, rail-to-rail output, 2.5 V to 10 V supply, 8-SOIC package, -40°C to 85°C.","salesMarkdown":"## Dual op amp drawing 1 µA per channel — what that means for the BOM The MAX407ESA+T from Maxim Integrated is a dual general-purpose operational amplifier in an 8-SOIC package, designed for applications where supply current is the primary constraint. Each of the two channels draws 1 µA of supply current, making this part a fit for battery-powered sensor interfaces, portable instrumentation, and always-on signal conditioning where every microamp counts. The rail-to-rail output stage allows the amplifier to swing close to the supply rails, preserving dynamic range in low-voltage systems. ## 8 kHz gain-bandwidth — the bandwidth budget With a gain-bandwidth product of 8 kHz, this op amp is intended for low-frequency signals — think DC measurement, thermocouple or RTD conditioning, strain-gauge amplifiers, and low-speed comparator functions. It is not suited for audio or control loops above a few kilohertz. The 0.005 V/µs slew rate reinforces the same message: the part trades speed for extreme power economy. ## Supply range and input characteristics The supply span runs from 2.5 V minimum to 10 V maximum, covering single-cell Li-ion through 9 V battery or regulated 5 V and 10 V rails. Input bias current is 0.1 pA, which is FET-input territory — negligible for high-impedance sources like pH probes or photodiode amplifiers. Input offset voltage is specified at 1 mV, adequate for many general-purpose sensing tasks without external trimming. Each output can source or sink 600 µA. ## Temperature grade and package Rated for the industrial temperature range of -40°C to 85°C, the MAX407ESA+T suits outdoor telecom, factory-floor sensors, and automotive cabin environments. The 8-SOIC package is a standard footprint for dual op amps, making PCB layout and second-sourcing straightforward. ## Lifecycle and sourcing posture The MAX407ESA+T carries an active lifecycle status and is ROHS3 compliant.","metaTitle":"MAX407ESA+T Op Amp, 8 kHz GBW, 1µA Supply","metaDescription":"MAX407ESA+T is a dual general-purpose op amp with 8 kHz gain-bandwidth, 1µA supply per channel, rail-to-rail output, 2.5V–10V supply range. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.005V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"0.1 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"8 kHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"600 µA","Voltage - Supply Span (Max)":"10 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$13.09","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$13.09000","currency":"USD"},{"qty":10,"price":"$12.02700","currency":"USD"},{"qty":25,"price":"$11.52880","currency":"USD"},{"qty":100,"price":"$10.15770","currency":"USD"},{"qty":250,"price":"$9.65912","currency":"USD"},{"qty":500,"price":"$9.03596","currency":"USD"},{"qty":1000,"price":"$8.28816","currency":"USD"},{"qty":2500,"price":"$7.97658","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/max406-max419.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the quiescent current per channel of MAX407ESA+T?","answer":"Each of the two amplifiers draws 1 µA of supply current."},{"question":"What is the gain-bandwidth product of MAX407ESA+T?","answer":"The gain-bandwidth product is 8 kHz."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX407ESAT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX407ESAT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}