{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4052ACSE+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4052ACSE","canonicalUrl":"https://icboms.com/analog-devices/MAX4052ACSE","factsUrl":"https://icboms.com/api/mcp/products/MAX4052ACSE%2B","rawCanonicalId":null},"summary":{"shortDescription":"Maxim Integrated MAX4052ACSE+, dual SP4T analog multiplexer/demultiplexer, 100 Ohm max on-resistance, 6 Ohm channel matching, -90 dB crosstalk at 100 kHz, 2V to 16V single or ±2.7V to ±8V dual supply, 16-SOIC, 0°C to 70°C.","salesMarkdown":"## Dual SP4T multiplexer for precision signal routing The MAX4052ACSE+ from Maxim Integrated is a dual 4:1 analog multiplexer/demultiplexer, built with two independent SP4T switches in a single 16-SOIC package. It is designed for routing analog or digital signals where low crosstalk and tight channel matching matter — think audio crosspoint switching, data acquisition front-ends, or test equipment signal muxing. Each switch handles rail-to-rail analog signals from a single supply of 2V to 16V, or dual supplies of ±2.7V to ±8V, making it flexible for single-rail or split-rail designs. The 100 Ohm max on-resistance is moderate — fine for voltage-mode signals into a high-impedance load, but watch the voltage drop if you are switching a current loop. Channel-to-channel matching is held to 6 Ohm max, so gain errors across paths stay tight. Off-leakage is a mere 100 pA max, and charge injection is only 2 pC — both good for preserving sample-and-hold accuracy or minimising glitch energy in precision circuits. ## Package and mounting Crosstalk is rated at -90 dB at 100 kHz — that is clean enough for 16-bit audio paths or low-frequency multiplexing without noticeable bleed between channels. If you are switching signals above 1 MHz, expect the isolation to degrade; this part is not built for RF muxing. Switching times are 175 ns on, 150 ns off — fast enough for most audio-rate or slow-data-rate muxing, but not for video-rate or high-speed ADC front-ends. The break-before-make action is inherent in the architecture, so you will not get momentary shorts between channels during transition. ## Package, temperature, and compliance Housed in a 16-SOIC (0.154\" body, 3.90 mm width) — a standard footprint that rework techs can swap with a fine-tip iron and some practice. No hot-air station needed. The tube shipping is fine for bench builds; if you need reel for production, check the alternate ordering codes. Temperature range is 0°C to 70°C — commercial grade only. That means indoor, office, or lab environments. Not rated for automotive, industrial, or outdoor use. ROHS3 compliant, so it passes the green-material check for EU markets. ## Lifecycle and sourcing — active, no LTB worry That means it is still a valid choice for new designs and production builds — no last-time-buy scramble needed.","metaTitle":"MAX4052ACSE+ Analog Switch IC, SP4T x2, 100 Ohm, 16-SOIC","metaDescription":"Maxim MAX4052ACSE+ dual SP4T analog multiplexer, 100 Ohm max on-resistance, -90 dB crosstalk at 100 kHz, 2V to 16V single supply, 16-SOIC.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Package":"Tube","Crosstalk":"-90dB @ 100kHz","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.154\\\", 3.90mm Width)","Switch Circuit":"SP4T","lifecycle_stage":"eol_hot","Charge Injection":"2pC","Number of Circuits":"2","Operating Temperature":"0°C ~ 70°C (TA)","Supplier Device Package":"16-SOIC","On-State Resistance (Max)":"100Ohm","Voltage - Supply, Dual (V±)":"±2.7V ~ 8V","Switch Time (Ton, Toff) (Max)":"175ns, 150ns","Voltage - Supply, Single (V+)":"2V ~ 16V","Current - Leakage (IS(off)) (Max)":"100pA","Multiplexer/Demultiplexer Circuit":"4:1","Channel Capacitance (CS(off), CD(off))":"2pF, 2pF","Channel-to-Channel Matching (ΔRon)":"6Ohm (Max)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.48","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$6.48000","currency":"USD"},{"qty":10,"price":"$5.81700","currency":"USD"},{"qty":25,"price":"$5.49960","currency":"USD"},{"qty":100,"price":"$4.76620","currency":"USD"},{"qty":250,"price":"$4.52176","currency":"USD"},{"qty":500,"price":"$4.05738","currency":"USD"},{"qty":1000,"price":"$3.42188","currency":"USD"},{"qty":2500,"price":"$3.25078","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/4453ce6aa2b8517c9dba20dea5f02013.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the on-resistance of MAX4052ACSE+?","answer":"The maximum on-resistance is 100 Ohm. Channel-to-channel matching is 6 Ohm max, so the resistance variation between paths is tight."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4052ACSE","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4052ACSE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}