{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX4012EUK+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX4012EUKT","canonicalUrl":"https://icboms.com/analog-devices/MAX4012EUKT","factsUrl":"https://icboms.com/api/mcp/products/MAX4012EUK%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Maxim Integrated MAX4012EUK+T, single voltage-feedback op-amp, 200 MHz -3dB bandwidth, 600 V/µs slew rate, rail-to-rail output, 3.15 V to 11 V supply, SOT-23-5, -40°C to 85°C.","salesMarkdown":"## 200 MHz bandwidth, 600 V/µs slew rate — where this op-amp fits The Maxim Integrated MAX4012EUK+T is a single voltage-feedback op-amp in a SOT-23-5 package, delivering 200 MHz -3dB bandwidth and 600 V/µs slew rate. These two specs together tell you this part is built for signal chains that need to preserve fast edges and wide frequency content — think video buffering, ADC front-end drivers, or high-speed photodiode amplifiers where the pulse shape matters. The rail-to-rail output stage lets it swing close to the supply rails, useful when running from a single 3.3 V or 5 V rail and you need every millivolt of headroom. Supply span runs from 3.15 V to 11 V, so it fits on a 3.3 V, 5 V, or even a 9 V rail without a separate regulator. ## Supply voltage and output drive — sizing the rail and load Minimum supply is 3.15 V, maximum is 11 V — that 3.15 V floor means it can run from a nominal 3.3 V rail with about 150 mV of margin before the part drops out of regulation. At 5.5 mA supply current per channel, the quiescent draw is modest for a 200 MHz amplifier; the 120 mA output current per channel gives it enough drive to handle a standard 75 Ω video load or a moderate ADC input. The 5.4 µA input bias current and 4 mV input offset voltage are typical for a high-speed voltage-feedback topology — fine for AC-coupled paths, but if you need sub-mV DC accuracy, a precision op-amp in a slower family would be the better call. ## Package and temperature grade — board-level fit Housed in a 5-pin SOT-23-5 (SC-74A) package, surface-mount only. The -40°C to 85°C operating range covers industrial environments — motor drives, outdoor telecom cabinets, factory-floor sensors — but stops short of the full automotive temperature range. If the board lives under the hood or in a downhole tool, you would need to look at a wider-temperature variant. The SOT-23-5 footprint is common and easy to route; the single-channel layout keeps the feedback loop short, which helps maintain the 200 MHz bandwidth without oscillation. ## Lifecycle and sourcing posture That means you can qualify it into a new design without worrying about an imminent obsolescence-driven respin. The part is available in Tape & Reel or Cut Tape options for the SOT-23-5 package.","metaTitle":"MAX4012EUK+T Voltage Feedback Op-Amp, 200 MHz, SOT-23-5","metaDescription":"MAX4012EUK+T single voltage-feedback op-amp with 200 MHz -3dB bandwidth, 600 V/µs slew rate, rail-to-rail output. Active, ROHS3, SOT-23-5.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"600V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","-3db Bandwidth":"200 MHz","Amplifier Type":"Voltage Feedback","Package / Case":"SC-74A, SOT-753","lifecycle_stage":"eol_hot","Current - Supply":"5.5mA","Number of Circuits":"1","Current - Input Bias":"5.4 µA","Operating Temperature":"-40°C ~ 85°C","Voltage - Input Offset":"4 mV","Supplier Device Package":"SOT-23-5","Current - Output / Channel":"120 mA","Voltage - Supply Span (Max)":"11 V","Voltage - Supply Span (Min)":"3.15 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.54","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$5.54000","currency":"USD"},{"qty":10,"price":"$4.97600","currency":"USD"},{"qty":25,"price":"$4.70400","currency":"USD"},{"qty":100,"price":"$4.07690","currency":"USD"},{"qty":250,"price":"$3.86780","currency":"USD"},{"qty":500,"price":"$3.47056","currency":"USD"},{"qty":1000,"price":"$2.92698","currency":"USD"},{"qty":2500,"price":"$2.78063","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/60c3b1388b03d79e7144c4f8e617f38d.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the bandwidth of MAX4012EUK+T?","answer":"The -3dB bandwidth is 200 MHz, and the slew rate is 600 V/µs. These two specs together determine the large-signal and small-signal frequency response — the part can handle video-rate signals and fast pulse edges."},{"question":"Can I buy MAX4012EUK+T in tape and reel packaging?","answer":"Yes, the part is listed with Tape & Reel (TR) and Cut Tape (CT) packaging options for the SOT-23-5 package. Sourced to order through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX4012EUKT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX4012EUKT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}