{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX336EAI+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX336EAI","canonicalUrl":"https://icboms.com/analog-devices/MAX336EAI","factsUrl":"https://icboms.com/api/mcp/products/MAX336EAI%2B","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX336EAI+ 16:1 multiplexer/demultiplexer, 400 Ohm on-resistance, 28-SSOP package, Tube, -86dB crosstalk at 100kHz, industrial temperature range.","salesMarkdown":"## 16:1 multiplexer with precision analog specs The MAX336EAI+: This is a single-circuit 16:1 multiplexer/demultiplexer — it routes one of sixteen analog inputs to a common output, or the reverse. The 400 Ohm max on-resistance is typical for a CMOS analog switch of this channel count; the 5 Ohm channel-to-channel matching means the resistance variation between selected channels stays tight, which matters when the mux feeds a high-impedance ADC input where the voltage drop across Ron must be predictable. Switching time is 500 ns max for both turn-on and turn-off, so the mux can cycle through channels at roughly 1 MHz without the output settling into the wrong state. Charge injection is 3.5 pC — low enough that the injected charge does not corrupt a sample-and-hold capacitor in a precision data-acquisition front end. ## Supply flexibility and signal integrity That dual-supply capability lets the switch handle bipolar analog signals without external level shifting — a ±15 V rail is common in industrial data-acquisition systems, and this mux sits directly on it. Crosstalk is -86 dB at 100 kHz, meaning the signal on one channel couples into an adjacent channel at roughly 50 µV per volt of signal — negligible for 12-bit systems and still usable for 16-bit at lower frequencies. Off-leakage current is 20 pA max, so the mux does not load the signal source when the channel is deselected. Channel capacitance is 2 pF on the source side and 20 pF on the drain side — the 20 pF on the common output sets the RC time constant with the Ron and the load, which limits the settling time when switching between channels. For a 10 kOhm load, the time constant is 200 ns, well within the 500 ns switching window. ## 28-SSOP package and industrial temperature range The supplier device package is the same 28-SSOP, so no footprint mismatch between the datasheet drawing and the shipping package. This qualifies the part for factory-floor enclosures, outdoor telecom cabinets, and engine-bay-adjacent electronics that see ambient heat but not the full under-hood 125°C.","metaTitle":"MAX336EAI+ Analog Devices 16:1 Multiplexer, 400 Ohm, 28-SSOP","metaDescription":"MAX336EAI+ Analog Devices 16:1 multiplexer, 400 Ohm on-resistance, -86dB crosstalk at 100kHz. Active lifecycle, ROHS3 compliant. Available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Package":"Tube","Crosstalk":"-86dB @ 100kHz","Mounting Type":"Surface Mount","Package / Case":"28-SSOP (0.209\\\", 5.30mm Width)","lifecycle_stage":"eol_hot","Charge Injection":"3.5pC","Number of Circuits":"1","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"28-SSOP","On-State Resistance (Max)":"400Ohm","Voltage - Supply, Dual (V±)":"±4.5V ~ 20V","Switch Time (Ton, Toff) (Max)":"500ns, 500ns","Voltage - Supply, Single (V+)":"4.5V ~ 20V","Current - Leakage (IS(off)) (Max)":"20pA","Multiplexer/Demultiplexer Circuit":"16:1","Channel Capacitance (CS(off), CD(off))":"2pF, 20pF","Channel-to-Channel Matching (ΔRon)":"5Ohm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$18.07","stockQuantity":23,"priceTiers":[{"qty":1,"price":"$18.07000","currency":"USD"},{"qty":10,"price":"$16.60800","currency":"USD"},{"qty":25,"price":"$15.91960","currency":"USD"},{"qty":100,"price":"$14.02650","currency":"USD"},{"qty":250,"price":"$13.33808","currency":"USD"},{"qty":500,"price":"$12.47754","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/647a1f73c9ebfc5ae83535153e94356f.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the crosstalk specification for MAX336EAI+?","answer":"Crosstalk is -86 dB at 100 kHz. This is the isolation between channels at that frequency — a -86 dB figure means the coupled signal is about 50 µV per volt of the active channel signal, which is low enough for 12- to 14-bit data-acquisition systems without additional guard traces."},{"question":"What package does the MAX336EAI+ come in?","answer":"It ships in a 28-SSOP package (0.209-inch body width, 5.30 mm height) in Tube format. The mounting type is surface mount, and the supplier device package is also 28-SSOP, so the footprint in the datasheet matches the delivered part."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX336EAI","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX336EAI when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}