{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX319ESA+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX319ESA","canonicalUrl":"https://icboms.com/analog-devices/MAX319ESA","factsUrl":"https://icboms.com/api/mcp/products/MAX319ESA%2B","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX319ESA+ SPDT analog switch, 35 Ohm on-resistance, 175 ns switching, 8-SOIC surface-mount package, tube.","salesMarkdown":"## Single SPDT switch with dual-supply flexibility The MAX319ESA+ is a single-pole double-throw (SPDT) analog switch from Analog Devices, configured as a 2:1 multiplexer/demultiplexer. It switches one common terminal to either of two independent I/O pins, with a break-before-make timing that prevents momentary shorting between channels. Rated for single-supply operation from 10 V to 30 V, or dual supplies from ±4.5 V to ±20 V, this part can pass bipolar signals without a DC bias — a common requirement for audio crosspoints and instrumentation front-ends that must handle both positive and negative swings. ## On-resistance and channel matching Maximum on-resistance is 35 Ohm, with channel-to-channel matching held to 2 Ohm max. In a multiplexed data-acquisition system, the matching figure determines the gain error when the load impedance is comparable to the switch resistance — for a 10 kOhm load, 2 Ohm mismatch contributes 0.02 % gain error, negligible for 12-bit systems but relevant at 16 bits. Off-channel leakage is just 250 pA max, and off-capacitance is 8 pF on both source and drain sides. In a high-impedance sensor multiplexer (e.g., a photodiode array with 10 MOhm bias resistors), the leakage current contributes a 2.5 mV offset — manageable with a differential front-end. ## Switching speed and charge injection Turn-on time is 175 ns max, turn-off 145 ns max. This is fast enough for audio-band multiplexing (up to ~1 MHz switching rate) and low-speed data acquisition, but not for video or RF routing where sub-10 ns switching is needed. Charge injection is 3 pC typical. In a sample-and-hold circuit, this charge transfers to the hold capacitor when the switch opens, creating a voltage error. For a 10 nF hold cap, 3 pC produces 0.3 mV of pedestal error — acceptable for 12-bit systems but a consideration for precision applications. ## Crosstalk and isolation Crosstalk between channels is -85 dB at 1 MHz. This means a 1 V signal on the active channel couples only 56 µV into the off channel — sufficient for audio mixing consoles and multi-channel data acquisition where channel bleed must stay below the noise floor of a 16-bit ADC. ## Package, temperature, and compliance Housed in an 8-pin SOIC narrow-body package (0.154-inch width, 3.90 mm), surface-mount only. Ships in a tube — not tape-and-reel, so pick-and-place lines need a tube feeder or a vibratory bowl.","metaTitle":"MAX319ESA+ SPDT Analog Switch, 35 Ohm, 8-SOIC","metaDescription":"Analog Devices MAX319ESA+ SPDT analog switch, 35 Ohm on-resistance, 175 ns switching, -85 dB crosstalk at 1 MHz. Active, RoHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Package":"Tube","Crosstalk":"-85dB @ 1MHz","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Switch Circuit":"SPDT","lifecycle_stage":"eol_hot","Charge Injection":"3pC","Number of Circuits":"1","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"8-SOIC","On-State Resistance (Max)":"35Ohm","Voltage - Supply, Dual (V±)":"±4.5V ~ 20V","Switch Time (Ton, Toff) (Max)":"175ns, 145ns","Voltage - Supply, Single (V+)":"10V ~ 30V","Current - Leakage (IS(off)) (Max)":"250pA","Multiplexer/Demultiplexer Circuit":"2:1","Channel Capacitance (CS(off), CD(off))":"8pF, 8pF","Channel-to-Channel Matching (&Delta;Ron)":"2Ohm (Max)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7.88","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$7.88000","currency":"USD"},{"qty":10,"price":"$7.12300","currency":"USD"},{"qty":25,"price":"$6.79120","currency":"USD"},{"qty":100,"price":"$5.89680","currency":"USD"},{"qty":250,"price":"$5.63176","currency":"USD"},{"qty":500,"price":"$5.13484","currency":"USD"},{"qty":1000,"price":"$4.47228","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/3f2c9069512011856e6089b042406c85.pdf","sourceUrl":null},"ai":{"faq":[{"question":"How can I order the MAX319ESA+ or check availability?","answer":"The MAX319ESA+ is an active, current-production part from Analog Devices. Submit an RFQ for your BOM quantity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX319ESA","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX319ESA when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}