{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX313EUE+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX313EUET","canonicalUrl":"https://icboms.com/analog-devices/MAX313EUET","factsUrl":"https://icboms.com/api/mcp/products/MAX313EUE%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX313EUE+T quad SPST-NO analog switch, 10 Ohm on-resistance, 225ns/185ns switching, -85dB crosstalk at 1MHz, 16-TSSOP package, Tape & Reel.","salesMarkdown":"## Package and rework reality — 16-TSSOP on the bench The MAX313EUE+T comes in a 16-TSSOP (0.173\", 4.40 mm width) — a fine-pitch SSOP derivative with 0.65 mm lead spacing. The body is small enough that a standard hot-air nozzle covers all eight leads on one side in a single pass, so hand rework is practical if the board-side thermal relief on the ground paddle is kept to a minimum. Surface-mount only — no through-hole variant exists. The 16-TSSOP footprint matches the JEDEC MO-153 standard, so the land pattern is well-documented in any PCB layout tool's library. ## On-resistance and what it means for signal headroom 10 Ohm max on-state resistance (Rds(on)) — at a 10 mA signal current the drop is 100 mV; at 100 mA it is 1 V. In a ±15 V dual-supply system that 1 V eats into the output swing, so the downstream stage's common-mode rejection needs to account for it. The 300 mOhm channel-to-channel matching (ΔRon) keeps the gain error consistent across all four switches, which matters for a precision multiplexer front-end. ## Switching speed and crosstalk — where the limits sit Turn-on time is 225 ns max, turn-off is 185 ns max — fast enough for audio-band multiplexing (up to ~2 MHz switching rate) but not for video-rate crosspoint applications where sub-50 ns switching is needed. The charge injection is 20 pC, which translates to a voltage glitch on the output capacitance; at a 15 pF load that is about 1.3 mV of feedthrough per switch event. Crosstalk is -85 dB at 1 MHz — this is the isolation between channels at a typical audio or low-frequency switching rate. It means less than 0.006% of the signal on one channel bleeds into the adjacent one at 1 MHz, which is clean enough for 16-bit audio paths but marginal for 24-bit systems where the noise floor is below -100 dB. ## Leakage and capacitance — the static and dynamic load Max off-leakage current is 500 pA — negligible for most signal paths, but in a high-impedance sensor front-end (10 MOhm source impedance) it contributes a 5 µV offset error at 25°C. The leakage doubles roughly every 10°C, so at 85°C it is about 8 nA, which starts to matter for a 10-bit ADC reading a 100 kOhm bridge. Channel capacitance is 15 pF on both the source and drain sides — this sets the bandwidth roll-off with the source impedance. Into a 10 kOhm source the -3 dB point is about 1 MHz, well above the audio band. This covers factory-floor control cabinets, outdoor telecom shelters, and under-hood automotive-adjacent electronics that see moderate heat but not the full 125°C engine-bay soak.","metaTitle":"MAX313EUE+T Analog Devices SPST Switch, 10 Ohm, 16-TSSOP","metaDescription":"MAX313EUE+T from Analog Devices — quad SPST-NO switch, 10 Ohm max on-resistance, 225ns switching, -85dB crosstalk at 1MHz. Active production, industrial temp.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Crosstalk":"-85dB @ 1MHz","Mounting Type":"Surface Mount","Package / Case":"16-TSSOP (0.173\\\", 4.40mm Width)","Switch Circuit":"SPST - NO","lifecycle_stage":"eol_hot","Charge Injection":"20pC","Number of Circuits":"4","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"16-TSSOP","On-State Resistance (Max)":"10Ohm","Voltage - Supply, Dual (V±)":"±4.5V ~ 20V","Switch Time (Ton, Toff) (Max)":"225ns, 185ns","Voltage - Supply, Single (V+)":"4.5V ~ 30V","Current - Leakage (IS(off)) (Max)":"500pA","Multiplexer/Demultiplexer Circuit":"1:1","Channel Capacitance (CS(off), CD(off))":"15pF, 15pF","Channel-to-Channel Matching (ΔRon)":"300mOhm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$21.15","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$21.15000","currency":"USD"},{"qty":10,"price":"$19.43500","currency":"USD"},{"qty":25,"price":"$18.62880","currency":"USD"},{"qty":100,"price":"$16.41360","currency":"USD"},{"qty":250,"price":"$15.60804","currency":"USD"},{"qty":500,"price":"$14.60106","currency":"USD"},{"qty":2500,"price":"$12.88922","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"What supply voltages does MAX313EUE+T support?","answer":"Single-supply from 4.5 V to 30 V, or dual-supply from ±4.5 V to ±20 V. This covers both +5 V logic systems and ±15 V analog signal chains without a separate regulator."},{"question":"How do I get pricing and availability for MAX313EUE+T?","answer":"Submit an RFQ for the exact quantity and target lead time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX313EUET","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX313EUET when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}