{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX3096ESE+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX3096ESE","canonicalUrl":"https://icboms.com/analog-devices/MAX3096ESE","factsUrl":"https://icboms.com/api/mcp/products/MAX3096ESE%2B","rawCanonicalId":null},"summary":{"shortDescription":"Maxim MAX3096ESE+, RS422/RS485 quad receiver, 10 Mbps data rate, 45 mV hysteresis, 3V to 3.6V supply, -40°C to +85°C, 16-SOIC (0.154\") surface-mount package, Tube.","salesMarkdown":"## Quad receiver for RS422/RS485 — no driver on die The MAX3096ESE+ is a quad RS422/RS485 line receiver from Maxim Integrated (now Analog Devices), designed to convert differential bus signals to single-ended logic levels on the 3V to 3.6V supply rail. It packs four independent receivers in a 16-SOIC package, with a 45 mV hysteresis comparator per channel to reject noise on twisted-pair or backplane buses. The 10 Mbps data rate supports Profibus, Modbus RTU, and other industrial fieldbus links running at standard baud rates with margin. ## 10 Mbps and 45 mV hysteresis — what they mean on a noisy bus At 10 Mbps the receiver handles the full Profibus-DP data rate (12 Mbps is the next step) and leaves headroom for cable-length derating. The 45 mV hysteresis is the key spec for industrial environments: it prevents the output from chattering when the differential input sits near the threshold on a long unterminated stub or in the presence of common-mode noise from nearby motor drives. Without that hysteresis you risk false start bits on a UART. ## Active lifecycle — no last-time-buy risk for this BOM line The MAX3096ESE+ carries an Active lifecycle status. The ROHS3 compliance covers the current European and global substance restrictions without an exemption expiry. ## Industrial temperature grade and supply range Rated for -40°C to +85°C operation, this receiver fits factory-floor cabinets, outdoor telecom shelters, and vehicle-mounted controllers where the ambient can climb above commercial limits. The 3V to 3.6V supply range aligns with common 3.3V FPGA and MCU I/O banks, eliminating the need for a separate level translator on the receiver output side. ## Surface-mount 16-SOIC — footprint and handling The part comes in a 16-SOIC (0.154\", 3.90 mm width) body, a standard JEDEC outline that fits a wide range of PCB footprints. The Tube shipping medium is typical for small-lot prototyping and low-volume production; for higher volumes the same die is available in Tape & Reel under alternate order codes.","metaTitle":"MAX3096ESE+ RS422/RS485 Receiver, 10 Mbps, 16-SOIC","metaDescription":"MAX3096ESE+ is a quad RS422/RS485 receiver from Analog Devices/Maxim. 10 Mbps data rate, 45 mV hysteresis, -40°C to +85°C. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Type":"Receiver","Package":"Tube","Protocol":"RS422, RS485","Data Rate":"10Mbps","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Receiver Hysteresis":"45 mV","Operating Temperature":"-40°C ~ 85°C","Supplier Device Package":"16-SOIC","Number of Drivers/Receivers":"0/4"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7.96","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$7.96000","currency":"USD"},{"qty":10,"price":"$7.18700","currency":"USD"},{"qty":25,"price":"$6.85280","currency":"USD"},{"qty":100,"price":"$5.95030","currency":"USD"},{"qty":250,"price":"$5.68284","currency":"USD"},{"qty":500,"price":"$5.18140","currency":"USD"},{"qty":1000,"price":"$4.51283","currency":"USD"}]},"links":{"datasheetUrl":"https://datasheets.maximintegrated.com/en/ds/MAX3095-MAX3096.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the difference between MAX3096ESE+ and MAX3095ESE+?","answer":"The MAX3095ESE+ is the same quad RS422/RS485 receiver in the same 16-SOIC package, but it operates from a 4.75V to 5.25V supply instead of the 3V to 3.6V rail of the MAX3096ESE+. If your design runs on a 5V bus, the MAX3095 is the direct fit; for 3.3V systems the MAX3096 is the correct choice."},{"question":"Can MAX3096ESE+ be used as an RS422 receiver?","answer":"Yes. The protocol support explicitly includes RS422, and the quad receiver configuration (0 drivers, 4 receivers) matches RS422's unidirectional multi-drop topology."},{"question":"What is the data rate of MAX3096ESE+?","answer":"The specified data rate is 10 Mbps, which covers standard industrial fieldbus speeds including Profibus up to 12 Mbps with margin."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX3096ESE","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX3096ESE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}