{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX295EPA+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX295EPA","canonicalUrl":"https://icboms.com/analog-devices/MAX295EPA","factsUrl":"https://icboms.com/api/mcp/products/MAX295EPA%2B","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX295EPA+, 8th-Order Butterworth Low Pass Switched Capacitor Filter, 50kHz Cutoff, 4.75V~11V Supply, 8-DIP (0.300\", 7.62mm), Through Hole, Tube.","salesMarkdown":"## Filter topology and what the 50 kHz cutoff means for your signal chain The MAX295EPA+ is an 8th-order Butterworth low-pass switched-capacitor filter, with a cutoff frequency of 50 kHz. The Butterworth response gives maximally flat passband gain — no ripple to amplify out-of-band noise, but the roll-off is gradual compared to an elliptic or Chebyshev, so the stopband rejection at, say, 60 kHz is around 48 dB, not the 80+ dB a sharper filter would deliver. That matters when you need to band-limit an ADC driver or reconstruct a PWM output: the filter's group delay stays flat across the passband, preserving waveform shape for time-domain measurements. ## Supply range and single-versus-dual-rail flexibility The device runs from a single 4.75 V to 11 V supply, or split ±2.375 V to ±5.5 V rails. If your board already carries a 5 V or 10 V rail, you can power the filter without an extra regulator. The split-rail option lets the filter handle bipolar input signals that swing below ground — common in audio or sensor conditioning where the signal is AC-coupled and centred at 0 V. ## Through-hole 8-DIP package — board-fit reality The 8-PDIP footprint is a legacy form factor — no fine-pitch alignment, no thermal pad to worry about. It does, however, consume more board area than an SOIC-8, so if your layout is density-constrained, the SOIC variant (MAX295CSA+) may be a better fit.","metaTitle":"Analog Devices MAX295EPA+ 8th-Order Butterworth LPF, 50kHz","metaDescription":"MAX295EPA+ 8th-order Butterworth low-pass switched-capacitor filter, 50kHz cutoff, 4.75V-11V supply, 8-DIP. Active production, ROHS3. Request quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Package":"Tube","Filter Type":"Butterworth, Low Pass Switched Capacitor","Filter Order":"8th","Mounting Type":"Through Hole","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Voltage - Supply":"4.75V ~ 11V, ±2.375V ~ 5.5V","Number of Filters":"1","Supplier Device Package":"8-PDIP","Frequency - Cutoff or Center":"50kHz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$21.87","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$21.87000","currency":"USD"},{"qty":10,"price":"$20.17100","currency":"USD"},{"qty":25,"price":"$19.26480","currency":"USD"},{"qty":100,"price":"$17.22490","currency":"USD"},{"qty":250,"price":"$16.43168","currency":"USD"},{"qty":500,"price":"$15.63844","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"How do I get current pricing and availability for the MAX295EPA+?","answer":"Submit an RFQ through this listing — the part is sourced through independent distribution channels and quoted to order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX295EPA","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX295EPA when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}