{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX14753EUE+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX14753EUET","canonicalUrl":"https://icboms.com/analog-devices/MAX14753EUET","factsUrl":"https://icboms.com/api/mcp/products/MAX14753EUE%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX14753EUE+T SP4T analog switch, dual 4:1 multiplexer/demultiplexer, 130Ohm on-resistance, 20MHz bandwidth, 16-TSSOP package.","salesMarkdown":"## Dual SP4T switch with wide supply range The MAX14753EUE+T is a dual SP4T (single-pole, four-throw) analog switch from Analog Devices, configured as two independent 4:1 multiplexer/demultiplexer circuits in a single 16-TSSOP package. Each switch path presents a maximum on-resistance of 130 Ohm, with channel-to-channel matching held to 500 mOhm — tight enough to keep gain errors consistent across multiplexed channels in a precision analog front-end. The part accepts a single supply from 20 V to 72 V, or dual supplies from ±10 V to ±36 V, covering common industrial bipolar rails (±15 V, ±24 V) and unipolar high-voltage buses (48 V, 60 V). This supply flexibility lets the switch handle large signal swings without clipping — a key requirement when multiplexing ±10 V sensor outputs or ±15 V data acquisition signals. ## Crosstalk and charge injection in the signal chain Crosstalk is specified at -62 dB at 100 kHz — this is the isolation between channels when one is active and the other is off. For a 16-bit ADC with a 100 kHz sampling rate, -62 dB of feedthrough keeps the interference from an adjacent channel below 0.5 LSB, assuming full-scale signals. If your multiplexer sits ahead of a high-resolution converter, this spec determines whether the off-channel leakage swamps the measurement. Charge injection is 200 pC typical — the amount of charge dumped onto the signal line when the switch turns off. In a sample-and-hold front-end, this charge creates a voltage step across the hold capacitor; for a 10 nF cap, 200 pC produces a 20 µV glitch. The -3 dB bandwidth of 20 MHz means the switch settles fast enough for most audio and low-speed instrumentation paths, but the charge injection floor sets the practical resolution limit in precision DC applications. Leakage current is 20 nA max per switch in the off state. For a 10 MΩ source impedance, 200 nA translates to a 2 mV offset error — worth derating if your signal source is high-impedance. ## Package and board integration The 16-TSSOP footprint is a standard JEDEC outline, so the PCB layout matches any generic TSSOP-16 land pattern. No exposed pad — thermal management relies on the copper traces and the ambient airflow, adequate for the sub-milliamp quiescent current of a CMOS switch. Switching times are 25 µs max on and 2 µs max off — the asymmetric timing means the break-before-make interval is dominated by the turn-off time. In multiplexer applications, this guarantees the previous channel is fully disconnected before the next one connects, preventing momentary short circuits between signal sources.","metaTitle":"MAX14753EUE+T Analog Devices SP4T Switch, 130Ohm, 16-TSSOP","metaDescription":"MAX14753EUE+T Analog Devices SP4T analog switch, 130Ohm on-resistance, 20MHz bandwidth, -62dB crosstalk. Active production, ROHS3 compliant. Request a quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Crosstalk":"-62dB @ 100kHz","Mounting Type":"Surface Mount","-3db Bandwidth":"20MHz","Package / Case":"16-TSSOP (0.173\\\", 4.40mm Width)","Switch Circuit":"SP4T","lifecycle_stage":"eol_hot","Charge Injection":"200pC","Number of Circuits":"2","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"16-TSSOP","On-State Resistance (Max)":"130Ohm","Voltage - Supply, Dual (V±)":"±10V ~ 36V","Switch Time (Ton, Toff) (Max)":"25µs, 2µs","Voltage - Supply, Single (V+)":"20V ~ 72V","Current - Leakage (IS(off)) (Max)":"20nA","Multiplexer/Demultiplexer Circuit":"4:1","Channel Capacitance (CS(off), CD(off))":"3.7pF","Channel-to-Channel Matching (ΔRon)":"500mOhm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7.96","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$7.96000","currency":"USD"},{"qty":10,"price":"$7.18800","currency":"USD"},{"qty":25,"price":"$6.85320","currency":"USD"},{"qty":100,"price":"$5.95070","currency":"USD"},{"qty":250,"price":"$5.68328","currency":"USD"},{"qty":500,"price":"$5.18180","currency":"USD"},{"qty":1000,"price":"$4.51318","currency":"USD"},{"qty":2500,"price":"$4.34603","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"What is the crosstalk specification of MAX14753EUE+T?","answer":"The crosstalk is -62 dB at 100 kHz, measured between channels. This figure tells you how much of an adjacent channel's signal leaks into the active channel — critical for multiplexing precision analog signals without cross-contamination."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX14753EUET","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX14753EUET when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}