{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LT6238HGN#PBF","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"LT6238HGNPBF","canonicalUrl":"https://icboms.com/analog-devices/LT6238HGNPBF","factsUrl":"https://icboms.com/api/mcp/products/LT6238HGN%23PBF","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices LT® series LT6238HGN#PBF quad general-purpose op amp, 215 MHz gain bandwidth, 70 V/µs slew rate, rail-to-rail output, 16-SSOP package, tube.","salesMarkdown":"## 215 MHz GBW, 70 V/µs — the speed envelope for signal conditioning The LT6238HGN#PBF is a quad general-purpose op amp from the LT® series, delivering 215 MHz gain-bandwidth product and a 70 V/µs slew rate — enough headroom to buffer or amplify signals up to about 90 MHz (-3 dB) without the output stage limiting the edge rate. Each of the four channels draws 3.15 mA supply current, so the full device consumes roughly 12.6 mA quiescent — a reasonable power budget for a high-speed quad in a 16-SSOP footprint. ## Rail-to-rail output, 3 V to 12.6 V supply span Output swings to within millivolts of either rail — the rail-to-rail stage means the usable signal range is nearly the full supply, which matters when running from a 3 V or 5 V single rail and you need every bit of headroom. Supply span runs from 3 V minimum to 12.6 V maximum, so the same BOM position fits both low-voltage portable gear and industrial 12 V rails without a regulator change. Each channel can source or sink 30 mA continuous — enough to drive a 50-ohm line or an ADC input stage directly. ## Package, temperature grade, and compliance Housed in a 16-lead SSOP (0.154-inch body, 3.90 mm width), surface-mount — the 0.0256-inch pitch demands a standard fine-pitch solder profile; no exposed pad, so thermal relief is through the leads and copper plane. Rated for -40°C to 125°C operation — this is the industrial/automotive temperature band, so it survives under-hood or outdoor enclosure ambient without derating the speed specs. ## Input offset and bias — what to expect at the front end Maximum input offset voltage is 350 µV — for a 10x gain stage that translates to 3.5 mV DC error at the output, acceptable for most signal-chain applications but worth noting if the target is sub-millivolt precision. Input bias current is 5 µA — a bipolar input stage; this current flows through the source impedance and creates an offset voltage equal to Ib × Rsource. For a 1 kΩ source, that is 5 mV additional error, so keep source impedance low or account for it in the feedback network.","metaTitle":"LT6238HGN#PBF Analog Devices Op Amp, 215 MHz, 70 V/µs","metaDescription":"Active-production quad general-purpose op amp, 215 MHz GBW, 70 V/µs slew rate, rail-to-rail output, -40 to 125°C, 16-SSOP. Quoted to order.","metaKeywords":null},"attributes":{"series":"LT®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"LT®","Package":"Tube","Slew Rate":"70V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","-3db Bandwidth":"90 MHz","Amplifier Type":"General Purpose","Package / Case":"16-SSOP (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"3.15mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"5 µA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"215 MHz","Voltage - Input Offset":"350 µV","Supplier Device Package":"16-SSOP","Current - Output / Channel":"30 mA","Voltage - Supply Span (Max)":"12.6 V","Voltage - Supply Span (Min)":"3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.6","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$11.60000","currency":"USD"},{"qty":10,"price":"$10.65900","currency":"USD"},{"qty":25,"price":"$10.21680","currency":"USD"},{"qty":100,"price":"$9.00180","currency":"USD"},{"qty":250,"price":"$8.56004","currency":"USD"},{"qty":500,"price":"$8.00776","currency":"USD"},{"qty":1000,"price":"$7.81500","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/641f796db23fc445e7085a297c54676f.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is LT6238HGN#PBF a direct drop-in replacement for AD8028ARMZ-REEL7?","answer":"No — the AD8028 is a dual-channel device in a different package (8-MSOP), while the LT6238 is a quad in 16-SSOP. The pinouts do not match, so a board layout change is required. Functionally, the AD8028 offers similar 190 MHz GBW and 100 V/µs slew rate but with lower input bias current (6.5 µA vs 5 µA)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/LT6238HGNPBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/LT6238HGNPBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}