{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LT6011AIDD#PBF","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"LT6011AIDDPBF","canonicalUrl":"https://icboms.com/analog-devices/LT6011AIDDPBF","factsUrl":"https://icboms.com/api/mcp/products/LT6011AIDD%23PBF","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices LT® series LT6011AIDD#PBF general-purpose op-amp, dual 350 kHz, rail-to-rail output, 35 µV offset, 135 µA supply, 8-DFN package.","salesMarkdown":"## Dual-channel precision op-amp for low-power signal chains The LT6011AIDD#PBF from Analog Devices is a dual general-purpose operational amplifier that combines 350 kHz gain-bandwidth with a supply current of just 135 µA per channel. This makes it a fit for multi-channel sensor interfaces or battery-powered instrumentation where the power budget per amplifier is under 150 µA. Its rail-to-rail output stage preserves dynamic range when operating from a single 2.7 V supply up to 36 V, so the same part serves both 3.3 V and 24 V industrial rails without a change in BOM position. ## DC precision and drift considerations for measurement front-ends Input offset voltage is trimmed to 35 µV, and input bias current is 20 pA typical. In a 10 kΩ source impedance path, the offset and bias errors sum to about 35.2 µV at the input — negligible for a 12-bit ADC with a 2.5 V reference, but worth derating if the source impedance rises to 1 MΩ, where the bias current alone contributes 20 µV of additional offset. The 0.11 V/µs slew rate limits large-signal bandwidth: for a 10 V p-p output swing, the full-power bandwidth is about 3.5 kHz. Fast transients above that rate will produce slew-induced distortion, so this part is better suited to DC and low-frequency AC conditioning than to high-speed data acquisition. ## Package, thermal path, and PCB layout notes The 8-WFDFN with exposed pad measures 3x3 mm and requires a thermal land on the PCB. The exposed pad must be soldered to a copper plane for rated thermal performance; without it, junction-to-ambient resistance rises and the output current drive of 20 mA per channel into a heavy load will push the die temperature above the 85°C industrial limit. Supply bypass should be placed within 3 mm of each supply pin — a 0.1 µF ceramic to the thermal pad ground plane, with a 10 µF bulk capacitor nearby. The DFN package has no centre pin; the pad is the sole thermal and electrical ground connection. ## Lifecycle and supply posture for BOM planning The LT6011AIDD#PBF carries an active product status with RoHS3 compliance.","metaTitle":"Analog Devices LT6011AIDD#PBF op-amp, 350 kHz, dual","metaDescription":"Analog Devices LT6011AIDD#PBF general-purpose op-amp, dual 350 kHz, rail-to-rail output, 35 µV offset, 135 µA supply, active production, RoHS3. Quoted to order.","metaKeywords":null},"attributes":{"series":"LT®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"LT®","Package":"Tube","Slew Rate":"0.11V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-WFDFN Exposed Pad","lifecycle_stage":"eol_hot","Current - Supply":"135µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"20 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"350 kHz","Voltage - Input Offset":"35 µV","Supplier Device Package":"8-DFN (3x3)","Current - Output / Channel":"20 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8.93","stockQuantity":18,"priceTiers":[{"qty":1,"price":"$8.93000","currency":"USD"},{"qty":10,"price":"$8.06800","currency":"USD"},{"qty":25,"price":"$7.69240","currency":"USD"},{"qty":100,"price":"$6.67930","currency":"USD"},{"qty":250,"price":"$6.37908","currency":"USD"},{"qty":500,"price":"$5.81622","currency":"USD"},{"qty":1000,"price":"$5.31000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/8bc7812958a070bf674b09a3efa3f4dc.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the closest functional second-source for LT6011AIDD#PBF?","answer":"The ADA4096-2WARMZ-RL is a dual, rail-to-rail general-purpose op-amp from Analog Devices with a 786 kHz gain-bandwidth and 0.4 V/µs slew rate, offering higher bandwidth and faster slew rate than the LT6011AIDD#PBF. However, its input bias current is 3 nA, significantly higher than the LT6011's 20 pA, so the ADA4096-2 is not a precision DC drop-in for high-impedance sensor front-ends. The LT6011AIDD#PBF's 35 µV offset is also tighter than the ADA4096-2's 35 µV typical, but the ADA4096-2 operates to 125°C versus the LT6011's 85°C. Evaluate the bias current and temperature range before substituti"},{"question":"What compliance documentation does Analog Devices provide for LT6011AIDD#PBF?","answer":"The part is RoHS3 compliant. Analog Devices typically provides a Declaration of Compliance and material composition data upon request through the distribution channel."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/LT6011AIDDPBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/LT6011AIDDPBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}