{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LT1884CN8#PBF","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"LT1884CN8PBF","canonicalUrl":"https://icboms.com/analog-devices/LT1884CN8PBF","factsUrl":"https://icboms.com/api/mcp/products/LT1884CN8%23PBF","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices LT® series, LT1884CN8#PBF, dual general-purpose op-amp in 8-DIP package. 2.2 MHz gain bandwidth, 1 V/µs slew rate, rail-to-rail output, 30 µV offset, 850 µA supply per channel, 2.7 V to 36 V supply range, 0°C to 70°C.","salesMarkdown":"## What this dual op-amp brings to the board The LT1884CN8#PBF is a dual, general-purpose op-amp from the LT® series, packaged in an 8-DIP through-hole body. It delivers rail-to-rail output swing, a 2.2 MHz gain-bandwidth product, and a 1 V/µs slew rate — enough bandwidth for audio-frequency signal chains, sensor buffers, and control-loop conditioning up to a few hundred kHz. Input offset voltage is trimmed to 30 µV, so you can skip external nulling in most precision DC paths. Supply current sits at 850 µA per amplifier, making it a reasonable choice for multi-channel boards where the power budget is tight but not sub-milliamp critical. The part runs on a single supply from 2.7 V up to 36 V, or split supplies, which simplifies rail assignment. Output can source or sink 50 mA per channel — enough to drive a modest headphone, an ADC reference buffer, or a relay coil through a series resistor. The 150 pA input bias current keeps errors low when working with high-impedance sources like photodiode amplifiers or pH probes. ## Supply range and single-supply operation The 2.7 V to 36 V supply span covers common industrial rails without needing a separate regulator. Rail-to-rail output means the signal can swing within millivolts of each rail, preserving dynamic range at low supply voltages. ## Temperature grade and environment Rated for 0°C to 70°C, this is a commercial-temperature part. It fits indoor equipment, benchtop instruments, office peripherals, and HVAC control panels. ## Sourcing and lifecycle The LT1884CN8#PBF is listed as Active and RoHS3 compliant. No end-of-life notice has been issued. Through-hole DIP packages remain in steady demand for legacy-support and low-volume production runs, so availability through independent distribution is consistent. We source this part against an RFQ — current pricing and lead time are confirmed at quote time, not from a static catalog number.","metaTitle":"LT1884CN8#PBF General Purpose Op-Amp, 2.2 MHz, Rail-to-Rail","metaDescription":"LT1884CN8#PBF dual general-purpose op-amp from Analog Devices. 2.2 MHz GBW, 30 µV offset, rail-to-rail output, 2.7 V to 36 V supply. Active, RoHS3.","metaKeywords":null},"attributes":{"series":"LT®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"LT®","Package":"Tube","Slew Rate":"1V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"850µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"150 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"2.2 MHz","Voltage - Input Offset":"30 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"50 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8.53","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$8.53000","currency":"USD"},{"qty":10,"price":"$7.70300","currency":"USD"},{"qty":25,"price":"$7.34480","currency":"USD"},{"qty":100,"price":"$6.37740","currency":"USD"},{"qty":250,"price":"$6.09076","currency":"USD"},{"qty":500,"price":"$5.55334","currency":"USD"},{"qty":1000,"price":"$5.07000","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/1884fs.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can LT1884CN8#PBF work with a single supply?","answer":"Yes. The LT1884CN8#PBF operates from a single supply between 2.7 V and 36 V, and its rail-to-rail output allows the signal to swing close to both supply rails, making it suitable for single-supply designs."},{"question":"What is the equivalent of LT1884CN8#PBF?","answer":"A close functional equivalent is the AD706JNZ, also a dual general-purpose op-amp in an 8-DIP package with a similar 0°C to 70°C temperature range. The AD706JNZ has a lower 800 kHz gain-bandwidth and 0.15 V/µs slew rate, so it is a better fit for lower-frequency applications where the LT1884CN8#PBF's 2.2 MHz bandwidth is not needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/LT1884CN8PBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/LT1884CN8PBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}