{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LT1102ACN8#PBF","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"LT1102ACN8PBF","canonicalUrl":"https://icboms.com/analog-devices/LT1102ACN8PBF","factsUrl":"https://icboms.com/api/mcp/products/LT1102ACN8%23PBF","rawCanonicalId":null},"summary":{"shortDescription":"Linear Technology LT1102ACN8#PBF, Instrumentation Amplifier, 1 Circuit, 30V/µs Slew Rate, 3.5 MHz Gain Bandwidth, 18 V to 36 V Supply, 8-DIP (0.300\", 7.62 mm), Through Hole, Tube.","salesMarkdown":"## What this instrumentation amp brings to a precision front-end The LT1102ACN8#PBF is a single-channel instrumentation amplifier in an 8-pin DIP package. It delivers a 30V/µs slew rate and 3.5 MHz gain-bandwidth product. ## Supply voltage range — 18 V to 36 V The LT1102ACN8#PBF requires a minimum 18 V supply and can handle up to 36 V across the rails. Quiescent supply current is 3.3 mA. ## Slew rate and bandwidth — signal fidelity at speed The 30V/µs slew rate is notably higher than typical precision instrumentation amps. Combined with 3.5 MHz GBP, this part can handle fast transients from bridge sensors or multiplexed inputs without significant slew-induced distortion. The 3 pA input bias current preserves accuracy when driving high-impedance sources like photodiodes or pH probes. ## Lifecycle and sourcing The LT1102ACN8#PBF carries an active lifecycle status with ROHS3 compliance. No end-of-life notice or last-time-buy window is in effect. For dual-sourcing, the AD625KNZ is a through-hole instrumentation amp in the same 8-DIP footprint, though its 25 MHz GBP and 5 V/µs slew rate shift the dynamic response — verify timing and settling in your application before substituting.","metaTitle":"LT1102ACN8#PBF Instrumentation Amp, 30V/µs Slew Rate, 8-DIP","metaDescription":"Active LT1102ACN8#PBF instrumentation amplifier from Linear Tech. 30V/µs slew rate, 3.5 MHz GBP, 3 pA bias, 18-36 V supply. Through-hole 8-DIP.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"30V/µs","Mounting Type":"Through Hole","Amplifier Type":"Instrumentation","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"3.3mA","Number of Circuits":"1","Current - Input Bias":"3 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"3.5 MHz","Voltage - Input Offset":"180 µV","Supplier Device Package":"8-PDIP","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"18 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$19.66","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$19.66000","currency":"USD"},{"qty":10,"price":"$18.06400","currency":"USD"},{"qty":25,"price":"$17.31560","currency":"USD"},{"qty":100,"price":"$15.25650","currency":"USD"},{"qty":250,"price":"$14.50768","currency":"USD"},{"qty":500,"price":"$13.57172","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/1102fb.pdf","sourceUrl":null},"ai":{"faq":[{"question":"How does LT1102ACN8#PBF compare to AD620?","answer":"The AD620 is a lower-power instrumentation amp with typical 1.3 mA supply current and lower GBP (~1 MHz). The LT1102ACN8#PBF offers higher slew rate (30V/µs vs ~1.2 V/µs) and wider supply range, but uses more supply current (3.3 mA). The AD620 is not a direct pin-for-pin replacement; check the pinout and compensation."},{"question":"What is the pinout of LT1102ACN8#PBF?","answer":"The LT1102ACN8#PBF comes in the standard 8-pin DIP (0.300\" width, 7.62 mm pitch) with a through-hole PDIP-8 footprint. The pin assignments follow the conventional instrumentation amp layout: inverting/non-inverting inputs, reference, output, and supply pins."},{"question":"What is an equivalent or replacement for LT1102ACN8#PBF?","answer":"The AD625KNZ is a through-hole instrumentation amp in the same 8-DIP package, but with 25 MHz GBP and 5 V/µs slew rate — verify your bandwidth and settling requirements before substituting. No exact pin-compatible second source is listed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/LT1102ACN8PBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/LT1102ACN8PBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}