{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LT1058CN#PBF","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"LT1058CNPBF","canonicalUrl":"https://icboms.com/analog-devices/LT1058CNPBF","factsUrl":"https://icboms.com/api/mcp/products/LT1058CN%23PBF","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices LT® series LT1058CN#PBF, Quad JFET Op-Amp, 5 MHz Gain Bandwidth, 13V/µs Slew Rate, 7 pA Input Bias, 250 µV Offset, 14-PDIP Through Hole, 0°C to 70°C, ROHS3 Compliant.","salesMarkdown":"The LT1058CN#PBF is a quad JFET-input operational amplifier from the Analog Devices LT® series, packaged in a 14-lead PDIP (0.300-inch, 7.62 mm body) for through-hole assembly. Input bias current is 7 pA, and input offset voltage is 250 µV — figures that suit precision analog signal conditioning in industrial control, audio processing, data acquisition front-ends, and test equipment where through-hole prototyping or high-reliability socketed designs are preferred. ## 5 MHz GBP and 13 V/µs slew — what the speed ratings mean With a 5 MHz gain-bandwidth product and 13 V/µs slew rate, the LT1058CN#PBF sits in the medium-speed tier of JFET op-amps. The 5 MHz GBP supports closed-loop gains up to about 10 at 500 kHz before open-loop roll-off limits accuracy; the 13 V/µs slew rate allows full-power output swings up to roughly 100 kHz at 20 V peak-to-peak. For audio applications, this covers the full audible band with margin. For data acquisition, the settling time to 0.01% will be in the low-microsecond range — adequate for multiplexed ADC drivers sampling below 100 kSPS. If your signal chain needs faster edges (e.g., driving a high-speed ADC input), the AD713 family (20 V/µs) offers a higher slew rate, though in a surface-mount SOIC package. ## Input precision — 7 pA bias, 250 µV offset The 7 pA input bias current is typical for JFET-input amplifiers and allows the LT1058CN#PBF to interface with high-impedance sources (e.g., photodiodes, piezoelectric sensors, pH probes) without significant voltage error from bias current flowing through source resistance. The 250 µV input offset voltage sets the DC accuracy floor: for a gain of 100, the output offset contributed by the amplifier alone is 25 mV. If your error budget demands lower offset, the AD712 family specifies 300 µV (dual) but with a lower 4 MHz GBP — a trade-off between DC precision and bandwidth. ## Active lifecycle and RoHS compliance — no LTB concern The #PBF suffix confirms a lead-free (RoHS) finish — compatible with lead-free reflow profiles for through-hole wave soldering, though the through-hole package is typically hand-soldered or wave-soldered.","metaTitle":"LT1058CN#PBF Quad JFET Op-Amp, 5 MHz, 13V/µs, DIP-14","metaDescription":"LT1058CN#PBF quad JFET op-amp from Analog Devices (LT® series). 5 MHz GBP, 13V/µs slew rate, 7 pA bias, 250 µV offset. 14-PDIP, 0°C to 70°C.","metaKeywords":null},"attributes":{"series":"LT®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LT®","Package":"Tube","Slew Rate":"13V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"14-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"1.7mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"7 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"5 MHz","Voltage - Input Offset":"250 µV","Supplier Device Package":"14-PDIP","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"20 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.33","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$11.33000","currency":"USD"},{"qty":10,"price":"$10.23300","currency":"USD"},{"qty":25,"price":"$9.75680","currency":"USD"},{"qty":100,"price":"$8.47170","currency":"USD"},{"qty":250,"price":"$8.09096","currency":"USD"},{"qty":500,"price":"$7.37708","currency":"USD"},{"qty":1000,"price":"$6.73500","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/10578fd.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What are the common alternatives to LT1058CN#PBF?","answer":"The closest functional alternative in a through-hole JFET quad op-amp is the AD713 family (e.g., AD713JRZ-16-REEL), which offers a 4 MHz GBP and 20 V/µs slew rate but in a surface-mount SOIC package. For a dual-channel alternative, the AD712KNZ (4 MHz, 20 V/µs) is a through-hole DIP-8 option. Neither is pin-compatible with the LT1058CN#PBF's 14-pin DIP layout."},{"question":"Is LT1058CN#PBF RoHS compliant?","answer":"Yes, it is ROHS3 Compliant — the #PBF suffix indicates a lead-free (RoHS) finish."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/LT1058CNPBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/LT1058CNPBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}