{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LT1013CPE4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LT1013CPE4","canonicalUrl":"https://icboms.com/texas-instruments/LT1013CPE4","factsUrl":"https://icboms.com/api/mcp/products/LT1013CPE4","rawCanonicalId":null},"summary":{"shortDescription":"Linear Technology LT1013CPE4, dual general-purpose op-amp, 1 MHz gain bandwidth, 0.4 V/µs slew rate, 60 µV input offset, 5 V to 30 V supply, 0°C to 70°C, 8-DIP through-hole package.","salesMarkdown":"The LT1013CPE4 is a dual general-purpose op-amp from Linear Technology in an 8-pin DIP through-hole package. It delivers a gain-bandwidth product of 1 MHz with a slew rate of 0.4 V/µs, drawing 350 µA per channel of supply current. The supply span from 5 V to 30 V covers single +5 V logic rails up to ±15 V industrial supplies. ## Supply voltage range and single-supply operation The LT1013CPE4 operates from a total supply span of 5 V to 30 V. This means it can run on a single +5 V rail (common in digital systems) or split ±15 V supplies (standard for industrial analog front-ends). Yes, it works in single-supply applications — the input common-mode range includes ground when using a single supply, though the output can swing within about 1 V of each rail. For a 5 V single-supply design, expect a usable output swing of roughly 1 V to 4 V. ## Slew rate and dynamic response The slew rate of 0.4 V/µs is moderate — typical for a general-purpose op-amp with 1 MHz GBW. It limits the large-signal bandwidth to about 60 kHz for a 10 V peak-to-peak output. For audio or low-frequency sensor signals this is fine; for high-speed data acquisition or fast pulse amplification you would look at a faster part. The 1 MHz gain-bandwidth product supports small-signal amplification up to 1 MHz, but full-power bandwidth is lower due to slew limiting. The supplier device package is 8-PDIP. This is a legacy through-hole format, common in breadboard prototyping, socketed designs, and retrofit repairs of older equipment. The Bulk shipping medium means the parts are supplied in tubes or loose, not tape-and-reel — factor that into your pick-and-place planning if you are using automated assembly.","metaTitle":"LT1013CPE4 Dual General-Purpose Op-Amp, 1 MHz, 0.4 V/µs","metaDescription":"LT1013CPE4 dual general-purpose op-amp from Linear Technology. 1 MHz GBW, 0.4 V/µs slew rate, 60 µV offset, 5-30 V supply, 0-70°C. Through-hole 8-DIP.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Bulk","Slew Rate":"0.4V/µs","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"350µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"15 nA","Operating Temperature":"0°C ~ 70°C (TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"60 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"20 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.24","stockQuantity":0,"priceTiers":[{"qty":93,"price":"$3.24000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"What is the slew rate of LT1013CPE4?","answer":"The slew rate is 0.4 V/µs, which is typical for a 1 MHz GBW general-purpose op-amp."},{"question":"Can LT1013CPE4 be used in single-supply applications?","answer":"Yes, the LT1013CPE4 can operate from a single supply as low as 5 V."},{"question":"What is the equivalent of LT1013CPE4?","answer":"The LT1013CPE4 is a dual general-purpose op-amp in a through-hole DIP package. For a surface-mount alternative with similar DC precision but higher speed, consider the TLV9351IDCKR (single, 3.5 MHz, 20 V/µs) or TLV9362IDDFR (dual, 10.6 MHz, 25 V/µs), though these are not pin-compatible and require a board redesign."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LT1013CPE4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LT1013CPE4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}