{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LT1010CT#06PBF","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"LT1010CT06PBF","canonicalUrl":"https://icboms.com/analog-devices/LT1010CT06PBF","factsUrl":"https://icboms.com/api/mcp/products/LT1010CT%2306PBF","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices LT1010CT#06PBF buffer amplifier, 1-circuit, 75V/µs slew rate, 150 mA output, 20 MHz GBW, TO-220-5 Flow 6 package, through-hole, tube.","salesMarkdown":"## Buffer selection for high-speed signal drive The LT1010CT#06PBF is a single-circuit buffer amplifier from Analog Devices, designed to drive capacitive or low-impedance loads without sacrificing signal integrity. Its 75 V/µs slew rate means the output can track a 10 V step in about 133 ns — fast enough to preserve the edge rate of a high-speed analog waveform or a digital control signal before it reaches a long cable or a large filter capacitor. With a gain-bandwidth product of 20 MHz, the buffer maintains closed-loop gain flatness across the audio band and into the low-MHz range, making it a candidate for video distribution, waveform generation, or line-driving stages where the load capacitance would otherwise cause instability in a general-purpose op-amp. ## Output drive and supply headroom Rated output current of 150 mA per channel gives the LT1010CT#06PBF enough headroom to drive a 50 Ω load to ±7.5 V, or to charge a 1 nF load at the full slew rate without current limiting. The supply current draw is 5 mA quiescent — the ratio of output capability to idle current means the thermal rise in the TO-220-5 package stays manageable even when driving continuous AC signals into moderate loads. Supply span from 4.5 V to 40 V total means the buffer works off a single 5 V rail for logic-level signals or a ±15 V supply for industrial analog front-ends. The wide range also allows the same BOM line to serve multiple product variants that share a board layout but run different supply voltages. ## Input bias and temperature range Input bias current is 500 µA — high compared to a JFET or CMOS buffer, but expected for a bipolar output stage that prioritises slew rate and output impedance. This matters when the buffer is DC-coupled to a high-impedance source: the bias current flowing through the source resistance creates an offset voltage that must be budgeted into the system error. For a 1 kΩ source, the offset is 500 mV; for a 10 Ω source it is 5 mV. Operating temperature range is 0 °C to 100 °C — commercial/industrial grade, not extended. The buffer is specified for controlled indoor environments or equipment where the ambient stays above freezing and below the boiling point of water. For cold-start or under-hood applications, the 0 °C lower limit is a hard floor. ## Package and procurement posture Housed in a TO-220-5 through-hole package with a Flow 6 variant lead form — the same 5-pin footprint as a standard TO-220 but with the centre pin trimmed or formed for specific socket or heatsink interfaces. The tube packaging (50 pieces typical) suits manual assembly or low-volume rework; no tape-and-reel option is listed. Lifecycle status is active, ROHS3 compliant.","metaTitle":"Analog Devices LT1010CT#06PBF Buffer, 75V/µs Slew Rate","metaDescription":"LT1010CT#06PBF buffer amplifier from Analog Devices, 75V/µs slew rate, 150 mA output, 20 MHz GBW. Active, ROHS3. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"75V/µs","Mounting Type":"Through Hole","Amplifier Type":"Buffer","Package / Case":"TO-220-5","lifecycle_stage":"eol_hot","Current - Supply":"5mA","Number of Circuits":"1","Current - Input Bias":"500 µA","Operating Temperature":"0°C ~ 100°C","Gain Bandwidth Product":"20 MHz","Supplier Device Package":"TO-220-5 Flow 6","Current - Output / Channel":"150 mA","Voltage - Supply Span (Max)":"40 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9.28","stockQuantity":26,"priceTiers":[{"qty":1,"price":"$9.28000","currency":"USD"},{"qty":10,"price":"$8.38700","currency":"USD"},{"qty":25,"price":"$7.99680","currency":"USD"},{"qty":100,"price":"$6.94340","currency":"USD"},{"qty":250,"price":"$6.63136","currency":"USD"},{"qty":500,"price":"$6.04624","currency":"USD"},{"qty":1000,"price":"$5.52000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"Is LT1010CT#06PBF obsolete?","answer":"No — the product status is active, with no end-of-life notice from Analog Devices. ROHS3 compliant. Sourced to order against an RFQ."},{"question":"What is the output current of LT1010CT#06PBF?","answer":"Rated 150 mA per channel. This is the continuous DC output capability; peak current into a capacitive load may be higher but is not separately specified."},{"question":"Is LT1010CT#06PBF lead-free?","answer":"Yes — ROHS3 compliant. The #06PBF suffix indicates a lead-free (Pb-free) finish."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/LT1010CT06PBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/LT1010CT06PBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}