{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LPV812DGKT","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LPV812DGKT","canonicalUrl":"https://icboms.com/texas-instruments/LPV812DGKT","factsUrl":"https://icboms.com/api/mcp/products/LPV812DGKT","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LPV812DGKT dual general-purpose op-amp, 8 kHz gain bandwidth, 425 nA supply per channel, rail-to-rail output, 8-VSSOP package.","salesMarkdown":"## 8 kHz GBW, 425 nA per channel — the power-constrained signal chain The LPV812DGKT is a dual general-purpose op-amp from Texas Instruments, built for applications where the supply budget is measured in microamps, not milliamps. Its 8 kHz gain-bandwidth product and 425 nA supply current per channel target battery-powered sensor interfaces, electrochemical front-ends, and energy-harvesting nodes that run for years on a single coin cell. The 0.1 pA typical input bias current means it does not load high-impedance sources like pH probes or pyroelectric detectors — the bias error stays negligible even with 10 MΩ source resistance. ## Rail-to-rail output, 1.6 V to 5.5 V supply — single-supply flexibility The rail-to-rail output stage swings within millivolts of both supply rails, preserving dynamic range when the total supply is only 1.6 V. The 55 µV typical input offset voltage keeps DC errors low enough for direct-coupled stages without trimming. Output current is rated at 4.7 mA per channel — sufficient to drive a successive-approximation ADC input or a reference bypass capacitor without an external buffer. The 0.0021 V/µs slew rate is the limiting factor for AC signals: at 8 kHz GBW, the full-power bandwidth into a 10 kΩ load is roughly 100 Hz for a 1 V peak-to-peak swing. This part is for DC and low-frequency conditioning, not audio or fast control loops. ## 8-VSSOP package, -40°C to 125°C — board integration and environment Housed in an 8-VSSOP package, which is the same footprint as the 8-TSSOP and 8-MSOP — 3.00 mm × 3.00 mm body, 0.65 mm pin pitch. The small footprint suits multi-layer PCBs where board area is at a premium. The operating temperature range spans -40°C to 125°C, covering both industrial and automotive under-hood environments.","metaTitle":"Texas Instruments LPV812DGKT Op-Amp, 8 kHz, 425 nA, 8-VSSOP","metaDescription":"Texas Instruments LPV812DGKT dual general-purpose op-amp: 8 kHz GBW, 425 nA supply per channel, 0.1 pA input bias, rail-to-rail output, 8-VSSOP.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.0021V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-TSSOP, 8-MSOP (0.118\\\", 3.00mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"425nA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"0.1 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"8 kHz","Voltage - Input Offset":"55 µV","Supplier Device Package":"8-VSSOP","Current - Output / Channel":"4.7 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.6 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.1","priceTiers":[{"qty":1,"price":"$3.10000","currency":"USD"},{"qty":10,"price":"$2.78500","currency":"USD"},{"qty":25,"price":"$2.63320","currency":"USD"},{"qty":100,"price":"$2.28200","currency":"USD"},{"qty":250,"price":"$2.16496","currency":"USD"},{"qty":500,"price":"$1.94260","currency":"USD"},{"qty":1250,"price":"$1.65600","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/5f4cf358e1b93402f1989d1db15bad91.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LPV812DGKT/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Texas Instruments provide for LPV812DGKT?","answer":"The LPV812DGKT is RoHS3 compliant. Texas Instruments provides a RoHS certificate, material declaration, and REACH SVHC disclosure on request. No UL or IEC certification is listed for this general-purpose op-amp."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LPV812DGKT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LPV812DGKT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}