{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LP3995ITL-2.5/NOPB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LP3995ITL-2.5-NOPB","canonicalUrl":"https://icboms.com/texas-instruments/LP3995ITL-2.5-NOPB","factsUrl":"https://icboms.com/api/mcp/products/LP3995ITL-2.5%2FNOPB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LP3995ITL-2.5/NOPB linear regulator, fixed 2.5V output, 150mA, 5-WFBGA/DSBGA package, surface mount, active lifecycle.","salesMarkdown":"The LP3995ITL-2.5/NOPB: The part is RoHS3 compliant, which means it meets the current EU restriction without exemptions — no lead, no phthalates, no red-phosphorus risk in the molding compound. ## Key parametrics for the power rail Fixed 2.5 V output at 150 mA continuous — the dropout voltage is only 0.1 V max at full load, so a 2.7 V input rail leaves enough headroom to keep the output in regulation even under load transients. PSRR runs 60 dB at 1 kHz, rolling off to 50 dB at 10 kHz — that 10 dB drop across a decade is typical for a low-Iq LDO; upstream switching noise at 1 MHz will see far less rejection, so a pi-filter ahead of the input is worth considering if the supply is a buck converter. Quiescent current is 150 µA typical, with a maximum supply current of 200 µA — the 50 µA margin between typical and max is the internal bias shift over temperature; budget the max figure for worst-case thermal analysis. That footprint is about the size of a grain of rice; the 0.5 mm pitch BGA demands a solder-mask-defined pad with a 0.25 mm aperture and a stencil thickness of 100–125 µm for a reliable joint. Cut Tape works for prototype runs or small-batch builds. Control features include an Enable pin — pulling it low shuts down the output and drops the quiescent current to near zero; useful for sequencing multiple rails or saving power in sleep modes. ## Protection and compliance Built-in protection covers over-temperature and short-circuit — the thermal shutdown threshold is typically 160°C junction; the short-circuit current foldback limits the output to about 300 mA until the fault clears. The output configuration is positive with a single regulator — it is a standard N-channel pass-FET LDO, so the dropout is low but the output capacitor ESR matters for stability; TI recommends a 1 µF ceramic on the output. Maximum input voltage is 6 V — the absolute maximum is 7 V, but staying below 6 V keeps the internal pass transistor in its safe operating area across the full temperature range.","metaTitle":"LP3995ITL-2.5/NOPB TI LDO 2.5V 150mA 5-DSBGA Active","metaDescription":"Texas Instruments LP3995ITL-2.5/NOPB LDO, 2.5V fixed output, 150mA, 0.1V dropout, PSRR 60dB~50dB, -40~125°C, 5-DSBGA. Active, RoHS3. Request quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"PSRR":"60dB ~ 50dB (1kHz ~ 10kHz)","Package":"Tape & Reel (TR); Cut Tape (CT)","Output Type":"Fixed","Mounting Type":"Surface Mount","Package / Case":"5-WFBGA, DSBGA","lifecycle_stage":"eol_hot","Control Features":"Enable","Current - Output":"150mA","Protection Features":"Over Temperature, Short Circuit","Number of Regulators":"1","Output Configuration":"Positive","Operating Temperature":"-40°C ~ 125°C","Voltage - Input (Max)":"6V","Voltage Dropout (Max)":"0.1V @ 150mA","Current - Supply (Max)":"200 µA","Supplier Device Package":"5-DSBGA (1.41x1.08)","Current - Quiescent (Iq)":"150 µA","Voltage - Output (Min/Fixed)":"2.5V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.75","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.75000","currency":"USD"},{"qty":10,"price":"$0.66100","currency":"USD"},{"qty":25,"price":"$0.62120","currency":"USD"},{"qty":100,"price":"$0.50690","currency":"USD"},{"qty":250,"price":"$0.47080","currency":"USD"},{"qty":500,"price":"$0.40068","currency":"USD"},{"qty":1250,"price":"$0.32054","currency":"USD"},{"qty":2500,"price":"$0.29049","currency":"USD"},{"qty":6250,"price":"$0.28350","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a4df0c87625f34d3150be6c755118068.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the PSRR of LP3995ITL-2.5/NOPB?","answer":"The PSRR is 60 dB at 1 kHz, rolling off to 50 dB at 10 kHz. This means the regulator attenuates power-supply ripple by a factor of 1000 at 1 kHz, dropping to a factor of 316 at 10 kHz — adequate for cleaning up a switching pre-regulator's output at typical switching frequencies below 100 kHz."},{"question":"What package does LP3995ITL-2.5/NOPB come in?","answer":"It comes in a 5-WFBGA, DSBGA package, specifically a 5-DSBGA measuring 1.41 x 1.08 mm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LP3995ITL-2.5-NOPB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LP3995ITL-2.5-NOPB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}