{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMV822MM","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMV822MM","canonicalUrl":"https://icboms.com/texas-instruments/LMV822MM","factsUrl":"https://icboms.com/api/mcp/products/LMV822MM","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMV822MM dual general-purpose op-amp, Automotive AEC-Q100 series, 5.6 MHz gain-bandwidth, 2 V/µs slew rate, rail-to-rail output, 8-VSSOP package.","salesMarkdown":"## 5.6 MHz gain-bandwidth, 2 V/µs slew — dual-channel general-purpose op-amp The LMV822MM from Texas Instruments is a dual-channel general-purpose operational amplifier with a 5.6 MHz gain-bandwidth product and a 2 V/µs slew rate, making it suitable for signal conditioning, active filtering, and sensor buffering in automotive and industrial applications qualified to AEC-Q100. Each channel draws 500 µA typical supply current, keeping the total quiescent draw under 1 mA for the dual package — a reasonable fit for battery-backed or thermally constrained designs. ## Supply range 2.5 V to 5.5 V, rail-to-rail output Operating from a single supply between 2.5 V and 5.5 V, the LMV822MM's rail-to-rail output stage swings within millivolts of both rails — useful when driving an ADC input or a control signal without a negative rail. The 45 mA output current per channel provides enough drive for moderate loads like a reference buffer or a small relay coil with a flyback diode. ## Input offset 1 mV, bias current 40 nA — bipolar-input floor Input offset voltage is 1 mV typical, and input bias current is 40 nA — both typical for a bipolar-input general-purpose op-amp at this price point. These numbers matter when the front-end signal is a few millivolts from a thermocouple or strain gauge; the offset error may need a software calibration or a trim resistor. ## Active lifecycle, AEC-Q100 automotive qualification Note that the part is listed as RoHS non-compliant, so confirm your exemption or accept non-RoHS inventory before committing the BOM line. ## 8-VSSOP package — small footprint for dense boards Housed in an 8-VSSOP (3.00 mm × 3.00 mm body), the LMV822MM fits into space-constrained designs where a larger SOIC-8 would not route. The surface-mount footprint is standard for this package class, so no special paste stencil or reflow profile is needed beyond the usual MSL handling.","metaTitle":"Texas Instruments LMV822MM Dual Op-Amp, 5.6 MHz, 2 V/µs","metaDescription":"TI LMV822MM dual general-purpose op-amp, 5.6 MHz GBW, 2 V/µs slew rate, rail-to-rail output, 500 µA/ch supply. Active lifecycle, AEC-Q100. Sourced to order.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100, LMV®","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"Automotive, AEC-Q100, LMV®","Package":"Bulk","Slew Rate":"2V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-TSSOP, 8-MSOP (0.118\\\", 3.00mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"500µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"40 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"5.6 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-VSSOP","Current - Output / Channel":"45 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.22","priceTiers":[{"qty":246,"price":"$1.22000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c2c5e04f8a35adca262f474218426014.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LMV822MM/alternatives.json"},"ai":{"faq":[{"question":"What is the closest functional second-source for LMV822MM?","answer":"The TLV9351IDCKR is a single-channel general-purpose op-amp with a wider 10.6 MHz bandwidth and 25 V/µs slew rate, but it is a single-channel device in a different package (SC-70-5). For a dual-channel drop-in, the closest parametric peer is the TLV9362IDDFR, which offers 10.6 MHz bandwidth and 25 V/µs slew rate in a dual-channel package, though the supply current per channel is higher at 2.6 mA. Neither is a pin-compatible replacement for the 8-VSSOP footprint of the LMV822MM without a board layout change."},{"question":"Is LMV822MM RoHS compliant?","answer":"No, the LMV822MM is listed as RoHS non-compliant. Verify your exemption or accept non-RoHS inventory before ordering."},{"question":"How can I order LMV822MM or check availability?","answer":"The LMV822MM is available to order against an RFQ through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMV822MM","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMV822MM when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}