{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMV358AIDGKT","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMV358AIDGKT","canonicalUrl":"https://icboms.com/texas-instruments/LMV358AIDGKT","factsUrl":"https://icboms.com/api/mcp/products/LMV358AIDGKT","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMV® LMV358AIDGKT, General Purpose Amplifier, 2 Circuits, Rail-to-Rail, 1 MHz Gain Bandwidth, 1.7V/µs Slew Rate, 70µA Supply (x2), 8-VSSOP, -40°C to 125°C.","salesMarkdown":"## 1 MHz gain-bandwidth at 70 µA — the power-conscious signal chain choice The 1.7 V/µs slew rate is enough for audio-band filtering, sensor buffering, and low-speed ADC drive — but if you are pushing 10 kHz square waves at full output swing, the slew-rate limit will round the edges. This is the part you pick when the BOM has a tight power budget and the signal bandwidth stays under 100 kHz. ## Package and footprint — 8-VSSOP with Tape & Reel option The LMV358AIDGKT ships in an 8-VSSOP package (the supplier device package), which is the same 3.00 mm body width as the 8-TSSOP and 8-MSOP options listed. For a board-level engineer, the 0.65 mm pin pitch on the VSSOP footprint is standard; the MSL rating (not cited here but typical for this package class) would dictate bake-before-reflow if the moisture barrier bag has been open past the floor-life window. The extended temperature range means the input offset voltage (1 mV max) and input bias current (10 pA typical) stay within spec across the full span, not just at 25°C. If your design lives in a heated office, a commercial-grade part would work, but the LMV358AIDGKT is the safer choice when the ambient can swing. ## Lifecycle and sourcing posture ROHS3 compliance is confirmed, which simplifies EU and global BOM compliance. For a procurement desk, this means no last-time-buy pressure and no forced redesign for obsolescence. ## Output drive and rail-to-rail capability The rail-to-rail output is the key feature here: at 2.5 V supply, the output can swing within a few tens of millivolts of the rails, preserving dynamic range in low-voltage sensor chains. But note the input common-mode range is not rail-to-rail — the datasheet (not reproduced here) typically specifies it as VSS to VDD - 1 V for this family, so high-side current sensing at 2.5 V single supply would hit the input limit.","metaTitle":"TI LMV358AIDGKT General-Purpose Op-Amp, 1 MHz GBWP","metaDescription":"Texas Instruments LMV358AIDGKT dual op-amp with 1 MHz GBW, 1.7 V/µs slew rate, rail-to-rail output, 70 µA supply per channel. -40°C to 125°C. Active.","metaKeywords":null},"attributes":{"series":"LMV®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LMV®","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"1.7V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-TSSOP, 8-MSOP (0.118\\\", 3.00mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"70µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"10 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-VSSOP","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.06","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.06000","currency":"USD"},{"qty":10,"price":"$0.95100","currency":"USD"},{"qty":25,"price":"$0.90240","currency":"USD"},{"qty":100,"price":"$0.74120","currency":"USD"},{"qty":250,"price":"$0.69280","currency":"USD"},{"qty":500,"price":"$0.61226","currency":"USD"},{"qty":1250,"price":"$0.48336","currency":"USD"},{"qty":2500,"price":"$0.45600","currency":"USD"}]},"links":{"datasheetUrl":"http://www.ti.com/general/docs/suppproductinfo.tsp?distId=10&gotoUrl=http%3A%2F%2Fwww.ti.com%2Flit%2Fgpn%2Flmv358a","sourceUrl":null},"ai":{"faq":[{"question":"Is LMV358AIDGKT a rail-to-rail op amp?","answer":"Yes, the output stage is rail-to-rail. The input common-mode range is not rail-to-rail — it typically extends from the negative supply to about 1 V below the positive supply. For a true rail-to-rail input/output op-amp, you would look at a different family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMV358AIDGKT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMV358AIDGKT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}