{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMV342IDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMV342IDR","canonicalUrl":"https://icboms.com/texas-instruments/LMV342IDR","factsUrl":"https://icboms.com/api/mcp/products/LMV342IDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMV® series, LMV342IDR, CMOS dual operational amplifier, 1 MHz gain bandwidth, 1V/µs slew rate, rail-to-rail output, 2.5V to 5.5V supply, 8-SOIC package, -40°C to 125°C.","salesMarkdown":"It delivers a 1 MHz gain-bandwidth product and a 1 V/µs slew rate, with rail-to-rail output swing. This combination suits battery-powered sensor interfaces, portable instrumentation, and general-purpose signal conditioning where low power and moderate speed are the priorities. The 1 MHz gain-bandwidth and 1 V/µs slew rate place this part in the slow-control-loop and audio-band category. It will drive a 1 kHz sine wave cleanly at full output swing, but expect significant slew-rate limiting above 100 kHz for large-signal steps. For a 3.3 V ADC driver sampling at 10 kSPS, the settling time is adequate; for a 1 MSPS SAR converter, look to a faster amplifier. Input offset voltage is rated at 250 µV maximum. That is typical for a CMOS op-amp at this price point. For a precision weigh-scale or thermocouple front end requiring sub-100 µV offset, you would need an auto-zero or chopper-stabilized part. For general-purpose buffering, filtering, or level shifting, this is fine. Quiescent current of 107 µA per channel keeps the total supply draw under 250 µA for the dual package. In a battery-powered IoT sensor node running off a CR2032, that is a meaningful saving compared to a 500 µA-per-channel general-purpose op-amp. ## Package and temperature grade Housed in an 8-pin SOIC package (body 3.90 mm wide), the LMV342IDR is a standard surface-mount footprint shared by countless dual op-amps. No AEC-Q qualification is listed in the record, so it is not explicitly rated for automotive stress grades. ## Lifecycle and sourcing No official second-source alternate is listed, but the OPA4374AIPWT (quad, 5.5 MHz) and TLV9362IDDFR (dual, 10.6 MHz) are faster siblings in the same supply-voltage and temperature envelope if the speed requirement is higher.","metaTitle":"Texas Instruments LMV342IDR CMOS Op-Amp, 1 MHz, Rail-to-Rail","metaDescription":"Dual CMOS op-amp from the LMV® series. 1 MHz GBW, 1 V/µs slew rate, rail-to-rail output, 107 µA supply per channel. Active, ROHS3.","metaKeywords":null},"attributes":{"series":"LMV®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LMV®","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"1V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"107µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"250 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"113 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.84","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.84000","currency":"USD"},{"qty":10,"price":"$0.74200","currency":"USD"},{"qty":25,"price":"$0.69680","currency":"USD"},{"qty":100,"price":"$0.56850","currency":"USD"},{"qty":250,"price":"$0.52808","currency":"USD"},{"qty":500,"price":"$0.44944","currency":"USD"},{"qty":1000,"price":"$0.35955","currency":"USD"},{"qty":2500,"price":"$0.32584","currency":"USD"},{"qty":5000,"price":"$0.31800","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/28d3b40e504679dc7fa62f18e827b190.pdf","sourceUrl":null},"ai":{"faq":[{"question":"When sourcing LMV342IDR, what's the closest functional second-source?","answer":"No official second-source alternate is listed. For a faster dual op-amp with similar supply range, consider the TLV9362IDDFR (10.6 MHz, 25 V/µs). The OPA4374AIPWT is a quad option at 5.5 MHz."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMV342IDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMV342IDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}