{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMV118MF","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMV118MF","canonicalUrl":"https://icboms.com/texas-instruments/LMV118MF","factsUrl":"https://icboms.com/api/mcp/products/LMV118MF","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMV® series LMV118MF, Voltage Feedback Op-Amp, 1 Circuit, Push-Pull Rail-to-Rail Output, 35V/µs Slew Rate, 45 MHz -3dB Bandwidth, 2.5V to 12V Supply, SOT-23-6 Package, -40°C to 85°C.","salesMarkdown":"It delivers a 35 V/µs slew rate and 45 MHz -3 dB bandwidth while drawing only 600 µA of supply current — a combination that places it in the high-speed, low-power niche between general-purpose op-amps and full video amplifiers. The rail-to-rail push-pull output stage lets it swing close to the supply rails, useful when driving an ADC input or a single-supply signal chain without a negative rail. ## 35 V/µs slew rate at 600 µA — the trade-off that defines this part The headline number is the slew rate: 35 V/µs. For a voltage-feedback amplifier drawing 600 µA quiescent current, that is fast — enough to handle a 5 MHz full-scale sine wave without slewing into distortion, or to settle a 10 V step in under 300 ns. The trade-off appears in the input bias current (400 nA) and input offset voltage (1 mV), which are higher than a precision CMOS op-amp would deliver. This part is not for microvolt-level sensor conditioning; it is for signal paths where speed matters more than DC accuracy — ADC drivers, video buffers, timing circuits, and high-speed filter stages. The 20 mA output current per channel is adequate to drive a 50 Ω load to about 1 Vpp, but for a full 2 Vpp into 50 Ω you would need a post-amplifier or a higher-current driver. No official second-source cross-reference is published by TI, but the TLV9351IDCKR (3.5 MHz, 20 V/µs, 10 pA input bias) is a functionally similar voltage-feedback op-amp in the same SOT-23-6 footprint if you need a dual-source option — though the TLV9351 is slower and draws less bias current, so check the speed requirement before substituting.","metaTitle":"LMV118MF Voltage Feedback Op-Amp, 35V/µs Slew Rate, SOT-23-6","metaDescription":"LMV118MF voltage feedback op-amp from Texas Instruments LMV® series. 35V/µs slew rate, 45 MHz bandwidth, rail-to-rail output, 600µA supply. SOT-23-6 package.","metaKeywords":null},"attributes":{"series":"LMV®","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LMV®","Package":"Bulk","Slew Rate":"35V/µs","Output Type":"Push-Pull, Rail-to-Rail","Mounting Type":"Surface Mount","-3db Bandwidth":"45 MHz","Amplifier Type":"Voltage Feedback","Package / Case":"SOT-23-6","lifecycle_stage":"eol_hot","Current - Supply":"600µA","Number of Circuits":"1","Current - Input Bias":"400 nA","Operating Temperature":"-40°C ~ 85°C","Voltage - Input Offset":"1 mV","Supplier Device Package":"SOT-23-6","Current - Output / Channel":"20 mA","Voltage - Supply Span (Max)":"12 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.75","stockQuantity":0,"priceTiers":[{"qty":401,"price":"$0.75000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a30ba2c00d5b57c4e69a5133bbe29e49.pdf","sourceUrl":null},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMV118MF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMV118MF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}