{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMR932F-GE2","brand":"ROHM Semiconductor","brandSlug":"rohm","productSlug":"LMR932F-GE2","canonicalUrl":"https://icboms.com/rohm/LMR932F-GE2","factsUrl":"https://icboms.com/api/mcp/products/LMR932F-GE2","rawCanonicalId":null},"summary":{"shortDescription":"ROHM LMR932F-GE2 dual general-purpose op amp, 1.4 MHz gain bandwidth, 0.35 V/µs slew rate, rail-to-rail output, 1.8 V to 5 V supply, 8-SOP package.","salesMarkdown":"## Dual op-amp for low-power signal conditioning The ROHM LMR932F-GE2 is a dual-channel, general-purpose operational amplifier in an 8-SOP surface-mount package. It delivers a 1.4 MHz gain-bandwidth product and a 0.35 V/µs slew rate, with rail-to-rail output swing that lets it drive ADC inputs or low-impedance loads without losing headroom near the supply rails. The 1.4 MHz gain-bandwidth product sets the usable closed-loop bandwidth for small-signal amplification. For a gain-of-10 stage, expect a -3 dB point around 140 kHz — enough for audio-frequency filtering, transducer conditioning, or low-speed ADC drive. The 0.35 V/µs slew rate limits large-signal response: a 2 V peak-to-peak output step slews in about 5.7 µs, so this part is not intended for fast pulse amplification or high-frequency switching. Keep signal edges slower than that to avoid slew-induced distortion. ## Supply range and quiescent current Quiescent current is 140 µA per amplifier — low enough for always-on sense circuits in battery-powered equipment, but not the ultra-micro-power tier (sub-10 µA) found in energy-harvesting nodes. Input offset voltage is 1 mV typical, input bias current 5 nA — adequate for general-purpose precision but not instrumentation-grade. The rail-to-rail output helps maintain dynamic range at low supply voltages.","metaTitle":"ROHM LMR932F-GE2 Op Amp, 1.4 MHz, Rail-to-Rail Output, 8-SOP","metaDescription":"ROHM LMR932F-GE2 dual general-purpose op amp: 1.4 MHz GBW, 0.35 V/µs slew rate, rail-to-rail output, 1.8 V to 5 V supply. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Microcontrollers & Processors (MCU / MPU / DSP)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.35V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"140µA","Number of Circuits":"2","Current - Input Bias":"5 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"1.4 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-SOP","Current - Output / Channel":"90 mA","Voltage - Supply Span (Max)":"5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.88","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.88000","currency":"USD"},{"qty":10,"price":"$0.77700","currency":"USD"},{"qty":25,"price":"$0.72960","currency":"USD"},{"qty":100,"price":"$0.59540","currency":"USD"},{"qty":250,"price":"$0.55304","currency":"USD"},{"qty":500,"price":"$0.47066","currency":"USD"},{"qty":1000,"price":"$0.37653","currency":"USD"},{"qty":2500,"price":"$0.34123","currency":"USD"},{"qty":5000,"price":"$0.31770","currency":"USD"},{"qty":12500,"price":"$0.30593","currency":"USD"},{"qty":25000,"price":"$0.29416","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c969eee3adbc288da56c0a37266fccaf.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Where can I buy LMR932F-GE2 available via RFQ confirmation?","answer":"The LMR932F-GE2 is available to order through independent distribution."},{"question":"Is LMR932F-GE2 compatible with 3.3 V systems?","answer":"Yes. Rail-to-rail output maintains swing close to the 3.3 V rail."},{"question":"What are the alternatives to LMR932F-GE2?","answer":"For single-channel options, the BU7241G-TR (900 kHz, 0.4 V/µs) and BU7461SG-TR (1 MHz, 1 V/µs) are lower-bandwidth alternatives with similar supply ranges."},{"question":"Can LMR932F-GE2 be used in audio applications?","answer":"The 1.4 MHz GBW and 0.35 V/µs slew rate support audio-frequency signal conditioning up to about 20 kHz with adequate gain. However, for high-fidelity or low-distortion audio paths, a dedicated audio op-amp with lower noise and higher slew rate is typically preferred."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/rohm/LMR932F-GE2","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/rohm/LMR932F-GE2 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}