{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMP8276MA","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMP8276MA","canonicalUrl":"https://icboms.com/texas-instruments/LMP8276MA","factsUrl":"https://icboms.com/api/mcp/products/LMP8276MA","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMP® series, LMP8276MA, differential amplifier, 1 circuit, 80 kHz gain bandwidth, 0.7 V/µs slew rate, rail-to-rail output, 4.75 V to 5.5 V supply, 8-SOIC surface mount, –40°C to 125°C.","salesMarkdown":"## Differential amplifier for precision current sensing The rail-to-rail output stage allows the signal to swing close to the supply rails, useful when driving an ADC input with a 5 V reference. The 80 kHz gain-bandwidth product limits the LMP8276MA to DC and low-frequency signals. If your design needs to amplify a 50 kHz PWM current waveform with fidelity, this part will roll off — you would be looking at a faster differential amplifier like the INA254A1IPWAR (350 kHz) or a general-purpose op-amp with higher GBW. The 0.7 V/µs slew rate is consistent with the bandwidth; expect about 2.8 V/µs for a full 5 V step, which is fine for slow-changing sensor outputs but not for fast transients. The input bias current of 20 nA is moderate — adequate for milliohm shunt sensing where the voltage drop is tens of millivolts, but not for high-impedance sources where picoamp bias is needed. The RoHS status is listed as non-compliant, so if your assembly line requires RoHS exemption documentation, confirm the material declaration with your distributor at quote time.","metaTitle":"LMP8276MA Differential Op-Amp, 80 kHz GBW, 0.7 V/µs, 8-SOIC","metaDescription":"LMP8276MA differential amplifier from TI LMP® series: 80 kHz GBW, 0.7 V/µs slew rate, rail-to-rail output, 4.75–5.5 V supply, –40 to 125°C. Active lifecycle.","metaKeywords":null},"attributes":{"series":"LMP®","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LMP®","Package":"Bulk","Slew Rate":"0.7V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"Differential","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1mA","Number of Circuits":"1","Current - Input Bias":"20 nA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"80 kHz","Voltage - Input Offset":"250 µV","Supplier Device Package":"8-SOIC","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"4.75 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.46","stockQuantity":0,"priceTiers":[{"qty":207,"price":"$1.46000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/e5b694adb0a1f4809eccf7f8b2837c43.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is a functional equivalent or replacement for the LMP8276MA?","answer":"There is no pin-compatible drop-in replacement listed in the official cross-reference. For a higher-bandwidth differential amplifier, the INA254A1IPWAR (350 kHz, 2.4 V/µs) is a current-sense alternative but has a single-ended output and different supply range. For a general-purpose op-amp with similar bandwidth, the TLV9351IDCKR (3.5 MHz, 20 V/µs) is much faster but not a differential amplifier — verify the circuit topology before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMP8276MA","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMP8276MA when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}