{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMH6739MQ","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMH6739MQ","canonicalUrl":"https://icboms.com/texas-instruments/LMH6739MQ","factsUrl":"https://icboms.com/api/mcp/products/LMH6739MQ","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMH6739MQ video amplifier, 3-channel buffer, 750 MHz -3dB bandwidth, 3300 V/µs slew rate, 32 mA supply, 90 mA output per channel, 16-SSOP package, surface mount.","salesMarkdown":"The Texas Instruments LMH6739MQ is a three-channel video amplifier configured as a buffer, delivering a 750 MHz -3dB bandwidth and a 3300 V/µs slew rate. That combination makes it suited for high-resolution video distribution, cable driving, and fast pulse amplification where signal integrity matters up into the UHF range. The three independent circuits share a common supply, so a single 8V to 12V rail (or ±4V to ±6V split supply) powers all channels. 3300 V/µs is an order of magnitude faster than a general-purpose op-amp. For a video buffer, that means the output can swing several volts in a nanosecond, preserving the sharp edges of fast video sync pulses or high-frequency analog waveforms. If the load capacitance or cable length starts to roll off the edge rate, this part keeps the signal clean without extra external compensation. ## Supply rails and output drive Each channel can source or sink 90 mA, which is enough to drive a 75-ohm video line directly with a standard 2 Vpp signal. The supply range of 8V to 12V single (or ±4V to ±6V dual) gives you flexibility: a single 12V rail works for most composite-video or RGB applications, while a ±5V split supply keeps the output centered around ground for AC-coupled systems. ## Lifecycle and RoHS status However, it is listed as RoHS non-compliant — it contains lead (Pb) above the threshold. That rules it out for EU RoHS-required builds unless you have an exemption, but it remains fully available for military, aerospace, or industrial designs where leaded solder is still permitted or preferred for reliability reasons.","metaTitle":"LMH6739MQ Video Amplifier, 750 MHz, 3300 V/µs, 16-SSOP","metaDescription":"LMH6739MQ video amplifier from Texas Instruments: 750 MHz -3dB bandwidth, 3300 V/µs slew rate, 3 circuits, 16-SSOP package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"3300V/µs","Applications":"Buffer","Mounting Type":"Surface Mount","-3db Bandwidth":"750 MHz","Package / Case":"16-SSOP (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"32 mA","Number of Circuits":"3","Supplier Device Package":"16-SSOP","Current - Output / Channel":"90 mA","Voltage - Supply, Single/Dual (±)":"8V ~ 12V, ±4V ~ 6V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.91","stockQuantity":0,"priceTiers":[{"qty":104,"price":"$2.91000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/84f47f674493cfe2f1e01d477ffae700.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Does LMH6739MQ have a lead-free option?","answer":"No — the LMH6739MQ is listed as RoHS non-compliant. It uses lead-based solder terminations, so it is not suitable for EU RoHS-required assemblies unless an exemption applies."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMH6739MQ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMH6739MQ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}