{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMH6647MAX/NOPB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMH6647MAX-NOPB","canonicalUrl":"https://icboms.com/texas-instruments/LMH6647MAX-NOPB","factsUrl":"https://icboms.com/api/mcp/products/LMH6647MAX%2FNOPB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments VIP10™ series, LMH6647MAX/NOPB, single voltage feedback op-amp, 55 MHz -3dB bandwidth, 22 V/µs slew rate, rail-to-rail output, 2.5 V to 12 V supply, 725 µA supply current, 8-SOIC package, -40°C to 85°C.","salesMarkdown":"That combination — wide bandwidth and low quiescent — makes it a fit for battery-operated signal chains where you need to condition a fast sensor signal or drive a SAR ADC input without burning through the battery budget. ## 725 µA supply — counting the microamps At 725 µA supply current, this op-amp sits in a power-bandwidth sweet spot. A typical general-purpose rail-to-rail op-amp at 55 MHz might pull 2 mA or more; the LMH6647 keeps the draw under a milliamp. For a LoRa or Zigbee sensor node running on a CR2032, that extra 1.3 mA saved per amplifier directly extends the sleep-to-wake cycle budget. The 20 mA output drive per channel is enough to swing a 2 Vpp signal into a 100 Ω load or drive the reference input of a successive-approximation ADC. Rated for a supply span of 2.5 V to 12 V, the part runs from a single Li-ion cell (3.0 V to 4.2 V) up to a regulated 12 V industrial rail. Input offset voltage is specified at 1 mV, input bias current at 650 nA, both typical values for a voltage-feedback topology in this speed class. ## Package and footprint The supplier device package is 8-SOIC — no exposed pad, no thermal-via stitch needed at the 725 µA quiescent level. The listed shipping medium is Bulk, so expect it in tubes or trays rather than tape-and-reel; factor that into your pick-and-place feeder setup if you are ordering production quantities.","metaTitle":"TI LMH6647MAX/NOPB Voltage Feedback Op-Amp, 55 MHz, 22 V/µs","metaDescription":"Texas Instruments LMH6647MAX/NOPB single voltage feedback op-amp with 55 MHz bandwidth, 22 V/µs slew rate, rail-to-rail output.","metaKeywords":null},"attributes":{"series":"VIP10™","packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"VIP10™","Package":"Bulk","Slew Rate":"22V/µs","Output Type":"Push-Pull, Rail-to-Rail","Mounting Type":"Surface Mount","-3db Bandwidth":"55 MHz","Amplifier Type":"Voltage Feedback","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"725µA","Number of Circuits":"1","Current - Input Bias":"650 nA","Operating Temperature":"-40°C ~ 85°C","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"20 mA","Voltage - Supply Span (Max)":"12 V","Voltage - Supply Span (Min)":"2.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.92","stockQuantity":0,"priceTiers":[{"qty":325,"price":"$0.92000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/5c9c5457771957a46e2a88f67a2c8d7e.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is LMH6647MAX/NOPB a rail-to-rail amplifier?","answer":"Yes, the output type is push-pull, rail-to-rail, allowing the output to swing within millivolts of both supply rails."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMH6647MAX-NOPB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMH6647MAX-NOPB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}