{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMC6084IN","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMC6084IN","canonicalUrl":"https://icboms.com/texas-instruments/LMC6084IN","factsUrl":"https://icboms.com/api/mcp/products/LMC6084IN","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMC® series LMC6084IN — CMOS quad operational amplifier, 1.3 MHz gain-bandwidth, 1.5 V/µs slew rate, 0.01 pA input bias current, rail-to-rail output, 4.5 V to 15.5 V supply, 14-DIP (0.300\") through-hole package, -40°C to 85°C operating temperature.","salesMarkdown":"## Precision quad CMOS op-amp for high-impedance signal chains Its standout feature is the 0.01 pA typical input bias current — three orders of magnitude lower than a general-purpose bipolar op-amp — making it the natural choice for photodiode transimpedance amplifiers, pH probe buffers, and other high-source-impedance sensor interfaces where leakage current would corrupt the measurement. With a gain-bandwidth product of 1.3 MHz and a 1.5 V/µs slew rate, this part handles audio-frequency signal conditioning, active filters, and slow ADC drivers. The 150 µV input offset voltage keeps DC accuracy tight without external trimming, and the supply range of 4.5 V to 15.5 V covers both 5 V and 12 V industrial rails. Each of the four amplifiers draws 2.2 mA supply current, totalling 8.8 mA for the package. That is modest for a quad precision part and keeps the thermal rise low in the PDIP package — no heatsinking needed. ## Package and mounting — through-hole for prototyping and legacy sockets The LMC6084IN comes in a 14-DIP (0.300\", 7.62 mm) through-hole package, also specified as the 14-PDIP supplier device package. This form factor is ideal for breadboard prototyping, socketed production boards, and hand-assembly runs where surface-mount reflow is not available. The 0.100\" pin pitch and 0.300\" row spacing are standard for DIP sockets. Mounting type is through hole only — no surface-mount variant is listed for this order code. ## RoHS note — verify assembly compliance The LMC6084IN is listed as RoHS non-compliant. If your assembly line requires RoHS-compliant materials, confirm the exemption or look for an alternative suffix. The lead (Pb) content in the PDIP package may affect solderability and waste-handling documentation in certain jurisdictions.","metaTitle":"LMC6084IN CMOS quad op-amp, 1.3 MHz GBW, 150 µV offset","metaDescription":"LMC6084IN quad CMOS op-amp from TI's LMC® series: 1.3 MHz GBW, 1.5 V/µs slew rate, 0.01 pA bias current, rail-to-rail output, 4.5–15.5 V supply, 14-DIP.","metaKeywords":null},"attributes":{"series":"LMC®","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LMC®","Package":"Bulk","Slew Rate":"1.5V/µs","Output Type":"Push-Pull, Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"CMOS","Package / Case":"14-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"2.2mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"0.01 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"1.3 MHz","Voltage - Input Offset":"150 µV","Supplier Device Package":"14-PDIP","Current - Output / Channel":"34 mA","Voltage - Supply Span (Max)":"15.5 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.84","stockQuantity":0,"priceTiers":[{"qty":163,"price":"$1.84000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/85eef226445f362ea465a718fed62cdb.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is LMC6084IN rail-to-rail?","answer":"The output stage is rail-to-rail (push-pull), meaning the output voltage can swing within millivolts of both supply rails. The input common-mode range, however, is not rail-to-rail — it extends from the negative rail to about 1.5 V below the positive rail. For true rail-to-rail input operation, consider a different family."},{"question":"What is the equivalent to LMC6084IN?","answer":"A close functional equivalent in CMOS quad op-amp with rail-to-rail output is the OPA4374 from Texas Instruments. The OPA4374 is surface-mount only (TSSOP-14), so the LMC6084IN's through-hole PDIP is preferred for prototyping or socketed designs."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMC6084IN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMC6084IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}