{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMC6062IN/NOPB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMC6062IN-NOPB","canonicalUrl":"https://icboms.com/texas-instruments/LMC6062IN-NOPB","factsUrl":"https://icboms.com/api/mcp/products/LMC6062IN%2FNOPB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMC® series CMOS dual operational amplifier, LMC6062IN/NOPB, 100 kHz gain bandwidth, 0.035 V/µs slew rate, rail-to-rail output, 8-DIP package, tube.","salesMarkdown":"## Dual CMOS op-amp, 100 kHz GBW, 8-DIP — what the ratings mean for the bench The LMC6062IN/NOPB is a dual CMOS operational amplifier from the LMC® series, packaged in an 8-pin DIP (0.300\" width) for through-hole mounting. It draws 40 µA per channel from a 4.5 V to 15.5 V supply span, making it a fit for battery-powered or low-thermal-budget analog front-ends where every microamp counts. The 100 kHz gain-bandwidth product paired with a 0.035 V/µs slew rate sets the signal bandwidth ceiling — expect clean gain up to roughly 10 kHz at a gain of 10 before the slew rate starts limiting the large-signal response. For slow sensor outputs (thermocouples, strain gauges, pH probes) this is ample; for audio or fast ADC drivers it will round the edges. ## Input stage — where the picoamp bias matters Input bias current is 0.01 pA typical, a figure that stays in the femtoamp range across the -40°C to +85°C industrial temperature range. This means the LMC6062IN/NOPB can interface directly with high-impedance sources like photodiode detectors or pH electrodes without the leakage errors that bipolar-input op-amps introduce. Input offset voltage is trimmed to 100 µV typical, so the DC error in a gain-of-100 stage is about 10 mV at the output — no external nulling pot needed for most applications. The push-pull rail-to-rail output stage swings within millivolts of either supply rail, preserving headroom in low-voltage single-supply designs (e.g., 5 V or 3.3 V rails). Output current capability is 35 mA per channel, enough to drive a 2 kΩ load to the rails or a moderate capacitive load without oscillation. ## Package and rework — the DIP advantage The 8-DIP (0.300\" body, 7.62 mm row spacing) is about as rework-friendly as a package gets. No hot-air station needed — a standard soldering iron with a chisel tip lifts the part cleanly without lifting pads. The 2.54 mm pin pitch means hand-soldering a replacement is trivial, and the 100 mil pin spacing matches perfboard or prototype sockets. No moisture sensitivity level (MSL) concern; DIPs are not moisture-sensitive and need no bake before reflow. The tube packaging keeps the leads straight and protected during storage.","metaTitle":"Texas Instruments LMC6062IN/NOPB CMOS Op-Amp, 100 kHz, 8-DIP","metaDescription":"LMC6062IN/NOPB dual CMOS op-amp, 100 kHz GBW, 0.01 pA bias, rail-to-rail output, 8-DIP. Active production, RoHS3. Quoted to order.","metaKeywords":null},"attributes":{"series":"LMC®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"LMC®","Package":"Tube","Slew Rate":"0.035V/µs","Output Type":"Push-Pull, Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"CMOS","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"40µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"0.01 pA","Operating Temperature":"-40°C ~ 85°C (TJ)","Gain Bandwidth Product":"100 kHz","Voltage - Input Offset":"100 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"35 mA","Voltage - Supply Span (Max)":"15.5 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.44","stockQuantity":18,"priceTiers":[{"qty":1,"price":"$5.44000","currency":"USD"},{"qty":10,"price":"$4.88400","currency":"USD"},{"qty":25,"price":"$4.61720","currency":"USD"},{"qty":100,"price":"$4.00170","currency":"USD"},{"qty":250,"price":"$3.79648","currency":"USD"},{"qty":500,"price":"$3.40658","currency":"USD"},{"qty":1000,"price":"$2.90400","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/63dc21c4b470e6328f52223dc7d188b7.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What package does the LMC6062IN/NOPB come in?","answer":"It is supplied in an 8-pin DIP (0.300\" body width, 7.62 mm row spacing) for through-hole mounting, shipped in a tube."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMC6062IN-NOPB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMC6062IN-NOPB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}