{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LMC6062IN","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LMC6062IN","canonicalUrl":"https://icboms.com/texas-instruments/LMC6062IN","factsUrl":"https://icboms.com/api/mcp/products/LMC6062IN","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LMC6062IN, LMC® series, dual CMOS operational amplifier, 100 kHz gain bandwidth, 0.035 V/µs slew rate, rail-to-rail output, 4.5 V to 15.5 V supply, 8-DIP through-hole package, industrial temperature -40°C to 85°C.","salesMarkdown":"## 100 kHz GBP, 0.01 pA bias — the precision low-frequency amplifier The LMC6062IN: The 0.01 pA typical input bias current is the headline parameter that sets it apart from general-purpose bipolar or JFET-input amplifiers; in a high-impedance sensor interface, that leakage floor directly determines the achievable resolution. ## Supply range and output swing The LMC6062IN operates from a single supply as low as 4.5 V up to a maximum of 15.5 V. Its push-pull rail-to-rail output stage swings within millivolts of both supply rails. ## Industrial temperature grade and through-hole package The 8-pin DIP package (0.300\" width, 7.62 mm pitch) and the 8-PDIP supplier package are through-hole only — the mounting type is listed as through hole. ## Active lifecycle and RoHS note The RoHS compliance status is listed as non-compliant. The series is LMC®, and the manufacturer is Texas Instruments.","metaTitle":"LMC6062IN CMOS Dual Op-Amp, 100 kHz, Rail-to-Rail Output","metaDescription":"LMC6062IN dual CMOS op-amp with 100 kHz GBP, 0.01 pA bias current, rail-to-rail output, 4.5-15.5 V supply, industrial temp.","metaKeywords":null},"attributes":{"series":"LMC®","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LMC®","Package":"Bulk","Slew Rate":"0.035V/µs","Output Type":"Push-Pull, Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"CMOS","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"40µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"0.01 pA","Operating Temperature":"-40°C ~ 85°C (TJ)","Gain Bandwidth Product":"100 kHz","Voltage - Input Offset":"100 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"35 mA","Voltage - Supply Span (Max)":"15.5 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.53","stockQuantity":0,"priceTiers":[{"qty":197,"price":"$1.53000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/5b89453f9cc7a37aba997cf542ae496f.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Does LMC6062IN have rail-to-rail output?","answer":"Yes, the output type is push-pull, rail-to-rail, meaning the output can swing within millivolts of both the positive and negative supply rails. This is especially useful in low-voltage single-supply circuits to maximize dynamic range."},{"question":"What is the input bias current of LMC6062IN?","answer":"The typical input bias current is 0.01 pA (10 fA), which is exceptionally low for a CMOS amplifier. This makes the LMC6062IN suitable for high-impedance sensor interfaces, photodiode amplifiers, and precision integrators where leakage current would otherwise dominate the error budget."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LMC6062IN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LMC6062IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}