{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM7372MR-NS","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM7372MR-NS","canonicalUrl":"https://icboms.com/texas-instruments/LM7372MR-NS","factsUrl":"https://icboms.com/api/mcp/products/LM7372MR-NS","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM7372MR-NS, dual voltage feedback operational amplifier, 3000 V/µs slew rate, 220 MHz -3 dB bandwidth, 260 mA output per channel, 9 V to 36 V supply, -40°C to 85°C, 8-PowerSOIC package, Bulk.","salesMarkdown":"## High-speed dual op amp for heavy loads The Texas Instruments LM7372MR-NS is a dual voltage-feedback operational amplifier built for applications that need to swing large voltages into capacitive or low-impedance loads at high speed. Its 3000 V/µs slew rate and 260 mA per-channel output current make it a natural fit for video distribution amplifiers, pin drivers in ATE, and waveform generators where settling time and drive strength matter more than DC precision. The 8-PowerSOIC package with an exposed pad (PowerPad) pulls heat out of the die when driving sustained output current — the pad must be soldered to a copper plane on the board. ## 260 mA output — driving cables and multiple loads Each channel delivers 260 mA continuously. ## Package and footprint The LM7372MR-NS comes in an 8-lead PowerSOIC package (3.90 mm body width, 0.154\" tall) with an exposed thermal pad on the bottom. The pad is the PowerPad — it must be soldered to a copper land on the PCB and connected to a ground plane for thermal relief. The pinout is standard for a dual op amp in SOIC-8, so it will fit the same footprint as many other dual op amps, but the thermal pad adds a ninth connection that is not present on a plain SOIC-8. Verify your PCB layout includes the pad land and the recommended via array under the part.","metaTitle":"LM7372MR-NS Voltage Feedback Op Amp, 3000V/µs Slew Rate","metaDescription":"LM7372MR-NS dual voltage feedback op amp from Texas Instruments. 3000V/µs slew rate, 260 mA per channel output, 220 MHz bandwidth. Active, RoHS non-compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Bulk","Slew Rate":"3000V/µs","Mounting Type":"Surface Mount","-3db Bandwidth":"220 MHz","Amplifier Type":"Voltage Feedback","Package / Case":"8-PowerSOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"13mA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"2.7 µA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"120 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"8-SO PowerPad","Current - Output / Channel":"260 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"9 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.63","stockQuantity":0,"priceTiers":[{"qty":83,"price":"$3.63000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/2726f2c8f313a127d4d9a4f5e27ebf43.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is LM7372MR-NS RoHS compliant?","answer":"No, the LM7372MR-NS is RoHS non-compliant. It contains lead and is not exempt for most commercial applications. Verify your regional RoHS exemption status before ordering for new designs."},{"question":"What is the maximum output current per channel for LM7372MR-NS?","answer":"Each channel is rated for 260 mA continuous output current. That is the maximum the output stage can deliver before hitting the current limit; the actual safe continuous current depends on the ambient temperature and the thermal design of the PCB."},{"question":"Does LM7372MR-NS fit an 8-SOIC footprint?","answer":"The pinout matches a standard SOIC-8, but the PowerPad adds a large thermal pad underneath that is not present on a plain SOIC-8. The part will physically insert into a standard SOIC-8 footprint, but the thermal pad will not be soldered — that may cause overheating if the part is driven hard. A PCB layout with the recommended pad and via pattern is required for full performance."},{"question":"How does LM7372MR-NS compare to the THS4215DRBT?","answer":"The THS4215DRBT is a single-channel voltage-feedback op amp with 350 MHz bandwidth and 970 V/µs slew rate — roughly one-third the slew rate of the LM7372MR-NS. The LM7372MR-NS offers two channels, higher output current (260 mA vs 105 mA), and a wider supply range (36 V vs 5 V). The THS4215 is a lower-power, lower-voltage part for signal-chain applications; the LM7372MR-NS is for high-voltage, high-drive tasks."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM7372MR-NS","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM7372MR-NS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}