{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM7171BIM-NS","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM7171BIM-NS","canonicalUrl":"https://icboms.com/texas-instruments/LM7171BIM-NS","factsUrl":"https://icboms.com/api/mcp/products/LM7171BIM-NS","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM7171BIM-NS voltage feedback op-amp, single circuit, 4100V/µs slew rate, 220 MHz -3dB bandwidth, 200 MHz GBP, 8-SOIC package, surface mount, -40 to 85°C.","salesMarkdown":"## 4100V/µs Slew Rate – What It Means for the Signal Chain The LM7171BIM-NS is a single voltage-feedback amplifier from Texas Instruments, packing a 4100 V/µs slew rate and 220 MHz -3 dB bandwidth. That slew rate means the output can swing 20 V peak-to-peak in under 5 ns — critical for driving capacitive loads like ADC inputs or coaxial cables in high-speed data acquisition without slew-induced distortion. ## Parametric Fit for High-Speed Analog Front-Ends Gain-bandwidth product sits at 200 MHz, so at a closed-loop gain of 10 the usable bandwidth is about 20 MHz before the open-loop roll-off cuts in. Input bias current is 2.7 µA and input offset voltage is 200 µV — both moderate figures that matter if the front-end drives a high-impedance sensor directly; a buffer stage may be needed for microvolt-level signals. Supply span runs from 5.5 V to 36 V single or dual supply, and each channel draws 6.5 mA quiescent. Output can source or sink 118 mA continuous — enough to drive a 50-ohm back-terminated line to ±5 V without external buffer. Operating temperature range is -40°C to 85°C, covering industrial-grade environments. The 8-SOIC package (3.90 mm body width) is a standard footprint for dual-supply op-amps — rework-friendly under hot air if the board has adequate thermal relief on the pads.","metaTitle":"Texas Instruments LM7171BIM-NS Voltage Feedback Op-Amp","metaDescription":"Texas Instruments LM7171BIM-NS voltage feedback op-amp, 4100V/µs slew rate, 220 MHz bandwidth, 8-SOIC. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Bulk","Slew Rate":"4100V/µs","Mounting Type":"Surface Mount","-3db Bandwidth":"220 MHz","Amplifier Type":"Voltage Feedback","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"6.5mA","Number of Circuits":"1","Current - Input Bias":"2.7 µA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"200 MHz","Voltage - Input Offset":"200 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"118 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"5.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.5","stockQuantity":0,"priceTiers":[{"qty":86,"price":"$3.50000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/635328b3f11d5205234f745f8124e625.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is the LM7171BIM-NS RoHS compliant?","answer":"No — Texas Instruments marks this part as RoHS non-compliant. If your assembly requires full RoHS exemption, confirm with your compliance team before ordering."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM7171BIM-NS","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM7171BIM-NS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}