{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM611AMN","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM611AMN","canonicalUrl":"https://icboms.com/texas-instruments/LM611AMN","factsUrl":"https://icboms.com/api/mcp/products/LM611AMN","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM611AMN, General Purpose Amplifier, 1 Circuit, 800 kHz Gain Bandwidth, 0.7 V/µs Slew Rate, 2.2 V to 36 V Supply, 8-DIP (0.300\", 7.62mm) Through Hole, 0°C to 70°C.","salesMarkdown":"## What this op-amp brings to a single-supply rail The LM611AMN: The 800 kHz gain-bandwidth product and 0.7 V/µs slew rate suit low-to-moderate frequency signal conditioning. ## Package and mounting — through-hole for serviceability Housed in an 8-DIP (0.300\", 7.62mm) package with through-hole leads, the LM611AMN is suited for socketed breadboards, prototyping, and field repairs where a soldered SMD part would be harder to swap. This limits the part to indoor, temperature-controlled environments — office equipment, test gear, appliance control boards. Not suited for automotive under-hood or outdoor telecom cabinets without additional thermal management. ## Package and mounting The input offset voltage is specified at 3.5 mV (typical), with an input bias current of 10 nA. For a general-purpose amplifier these are adequate for DC-coupled signals above a few millivolts. If your application requires sub-millivolt precision or high-impedance sources (e.g., pH probes, photodiode transimpedance stages), this part will need a trim circuit or a precision op-amp with lower offset and bias. ## Output drive capability The 25 mA output per channel can drive an ADC input or a small relay coil via a transistor. ## Lifecycle and compliance note It is listed as RoHS non-compliant — verify your local regulatory requirements if you are shipping into RoHS-enforced markets.","metaTitle":"LM611AMN General Purpose Op-Amp, 800 kHz, 8-DIP Through Hole","metaDescription":"LM611AMN general-purpose op-amp with 800 kHz GBP, 0.7 V/µs slew rate, single supply 2.2 V to 36 V. 8-DIP through-hole. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"0.7V/µs","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"210µA","Number of Circuits":"1","Current - Input Bias":"10 nA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"800 kHz","Voltage - Input Offset":"3.5 mV","Supplier Device Package":"8-MDIP","Current - Output / Channel":"25 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"2.2 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.53","stockQuantity":0,"priceTiers":[{"qty":46,"price":"$6.53000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7115a16391bfcb915d4907f04e9823e0.pdf","sourceUrl":null},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM611AMN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM611AMN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}