{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM5110-2MX/NOPB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM5110-2MX-NOPB","canonicalUrl":"https://icboms.com/texas-instruments/LM5110-2MX-NOPB","factsUrl":"https://icboms.com/api/mcp/products/LM5110-2MX%2FNOPB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM5110-2MX/NOPB, dual low-side N-channel MOSFET gate driver, inverting input, independent channels, 3A source / 5A sink peak output, 14ns rise / 12ns fall typ, 3.5V–14V supply, -40°C to 125°C, 8-SOIC package.","salesMarkdown":"## Dual low-side driver for N-channel MOSFETs The Texas Instruments LM5110-2MX/NOPB is a dual low-side gate driver for N-channel MOSFETs. It delivers a peak output current of 3 A source and 5 A sink, with typical rise and fall times of 14 ns and 12 ns respectively. ## Logic interface and supply rail The inverting input means a logic high on the input pulls the gate low. That's the opposite of a non-inverting driver — if your controller outputs active-high PWM, you'll need to invert the signal in firmware or add a logic inverter. ## Lifecycle and sourcing The LM5110-2MX/NOPB is listed as Active with ROHS3 compliance.","metaTitle":"LM5110-2MX/NOPB Low-Side Gate Driver, 3A/5A Peak, 8-SOIC","metaDescription":"Texas Instruments LM5110-2MX/NOPB dual low-side N-channel MOSFET driver. 3A source / 5A sink peak, 14ns rise / 12ns fall, 3.5V–14V supply, -40°C to 125°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Gate Type":"N-Channel MOSFET","Input Type":"Inverting","Channel Type":"Independent","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"3.5V ~ 14V","Number of Drivers":"2","Driven Configuration":"Low-Side","Operating Temperature":"-40°C ~ 125°C (TJ)","Rise / Fall Time (Typ)":"14ns, 12ns","Supplier Device Package":"8-SOIC","Logic Voltage - VIL, VIH":"0.8V, 2.2V","Current - Peak Output (Source, Sink)":"3A, 5A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.56","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.56000","currency":"USD"},{"qty":10,"price":"$2.30300","currency":"USD"},{"qty":25,"price":"$2.17280","currency":"USD"},{"qty":100,"price":"$1.85140","currency":"USD"},{"qty":250,"price":"$1.73840","currency":"USD"},{"qty":500,"price":"$1.52110","currency":"USD"},{"qty":1000,"price":"$1.26034","currency":"USD"},{"qty":2500,"price":"$1.23000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c2b875bc48dfce18d4d3b459e902be39.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can LM5110-2MX/NOPB drive IGBTs or SiC MOSFETs?","answer":"The LM5110-2MX/NOPB is specified for N-channel MOSFETs with a low-side driven configuration. The 5 A sink peak and 14 V maximum supply are within the range needed for many IGBT modules, but the inverting input and independent channel architecture may not suit every IGBT gate drive requirement. For SiC MOSFETs, the 14 V supply maximum is below the typical 18–20 V bias used for SiC drivers — check the specific SiC device's gate drive voltage range before fitting this part."},{"question":"What is the rise/fall time of LM5110-2MX/NOPB?","answer":"Typical rise time is 14 ns and fall time is 12 ns. These are typical values at a specified load capacitance — actual edge rates scale with the gate charge of the driven MOSFET."},{"question":"What is the closest functional equivalent to LM5110-2MX/NOPB?","answer":"The LM5106MM/NOPB is a half-bridge driver with non-inverting input and synchronous channel type, rated for 1.2 A peak output and 8 V supply typical. It is not a direct pin-compatible replacement — the LM5110-2MX/NOPB offers higher peak current (3 A / 5 A) and independent low-side channels. For a drop-in second source, verify the pinout and logic polarity against your layout."},{"question":"Can LM5110-2MX/NOPB be used as a high-side driver?","answer":"No — the driven configuration is low-side only. The LM5110-2MX/NOPB drives the gate referenced to ground, not to a floating bootstrap supply. For high-side drive, look at a half-bridge or high-side driver such as the LM5106."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM5110-2MX-NOPB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM5110-2MX-NOPB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}