{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM358BIDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM358BIDR","canonicalUrl":"https://icboms.com/texas-instruments/LM358BIDR","factsUrl":"https://icboms.com/api/mcp/products/LM358BIDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM358BIDR, General Purpose Amplifier, Dual Circuit, 1.2 MHz Gain Bandwidth, 0.5 V/µs Slew Rate, 3 V to 36 V Supply, 300 µA per Channel, 8-SOIC Package, -40°C to 85°C.","salesMarkdown":"## Dual general-purpose op-amp in 8-SOIC — the LM358BIDR Each amplifier draws 300 µA, keeping the total quiescent current to 600 µA for both channels. The 3 V minimum supply span lets this part run from a single lithium cell or a 3.3 V regulated rail, while the 36 V maximum covers 24 V industrial buses with margin. That wide compliance means the same BOM line can serve a 5 V sensor conditioner and a 24 V motor-current sense amplifier, reducing line-item count. The trade-off is the bipolar input stage: input bias current of 10 nA is higher than a CMOS-input op-amp, so high-impedance sources (> 1 MΩ) will see a noticeable voltage drop across the source resistance. For circuits with source impedances under 100 kΩ, the LM358BIDR is a straightforward fit. ## 1.2 MHz GBW and 0.5 V/µs slew — what the bandwidth buys you The 1.2 MHz gain-bandwidth product supports closed-loop gains up to 100 with a 12 kHz bandwidth, adequate for audio-frequency filtering, slow servo loops, and DC measurement. The 0.5 V/µs slew rate limits large-signal response: a 10 V output step slews in 20 µs, so fast pulse amplification or high-frequency sine waves above 20 kHz will show distortion. For those applications, a higher-slew device like the TLV9362IDDFR (25 V/µs) would be the correct choice. The LM358BIDR is at home in signal conditioning, active filters below 10 kHz, and comparator-like threshold detection where speed is not critical. It does not carry AEC-Q100 automotive qualification, so it is not a direct fit for under-hood or chassis-domain electronics without additional qualification testing.","metaTitle":"TI LM358BIDR General Purpose Op-Amp, 1.2 MHz, 0.5 V/µs","metaDescription":"Texas Instruments LM358BIDR dual general-purpose op-amp in 8-SOIC. 1.2 MHz GBW, 0.5 V/µs slew rate, 3-36 V supply, 300 µA per channel.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR) Cut Tape (CT)","Slew Rate":"0.5V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"300µA (x2 Channels)","Number of Circuits":"2","Base Product Number":"LM358","Current - Input Bias":"10 nA","Operating Temperature":"-40°C ~ 85°C (TA)","Gain Bandwidth Product":"1.2 MHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.4700","priceTiers":[{"qty":1,"price":"$0.47000","currency":"USD"},{"qty":10,"price":"$0.34700","currency":"USD"},{"qty":25,"price":"$0.30400","currency":"USD"},{"qty":100,"price":"$0.19670","currency":"USD"},{"qty":250,"price":"$0.16288","currency":"USD"},{"qty":500,"price":"$0.13028","currency":"USD"},{"qty":1000,"price":"$0.09989","currency":"USD"},{"qty":2500,"price":"$0.08686","currency":"USD"},{"qty":5000,"price":"$0.07817","currency":"USD"},{"qty":12500,"price":"$0.06949","currency":"USD"},{"qty":25000,"price":"$0.06514","currency":"USD"},{"qty":62500,"price":"$0.05776","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/ed0f19212d1871ec6267e1420696c908.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LM358BIDR/alternatives.json"},"ai":{"faq":[{"question":"What is the LM358BIDR equivalent or replacement?","answer":"The LM358BIDR is a standard dual general-purpose op-amp. For a single-channel drop-in with wider bandwidth, the TLV9351IDCKR provides 3.5 MHz GBW and 20 V/µs slew rate. Neither is a pin-for-pin second source — verify the pinout and supply requirements against your layout."},{"question":"What is the LM358BIDR's slew rate and what does it mean for my design?","answer":"The LM358BIDR has a slew rate of 0.5 V/µs. This limits large-signal response: a 10 V output step takes 20 µs to settle. For audio-frequency signals below 10 kHz or DC measurement, this is adequate. For fast pulse amplification or waveforms above 20 kHz, a higher-slew device is needed."},{"question":"Does the LM358BIDR come in Tape & Reel packaging?","answer":"The package is an 8-SOIC with 3.90 mm body width."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM358BIDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM358BIDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}