{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM2904VQDRQ1","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM2904VQDRQ1","canonicalUrl":"https://icboms.com/texas-instruments/LM2904VQDRQ1","factsUrl":"https://icboms.com/api/mcp/products/LM2904VQDRQ1","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments Automotive, AEC-Q100 series, LM2904VQDRQ1 general-purpose op amp, dual channel, 700 kHz GBW, 0.3 V/µs slew rate, 8-SOIC package.","salesMarkdown":"The LM2904VQDRQ1: With a gain-bandwidth product of 700 kHz and a slew rate of 0.3 V/µs, this op amp handles sensor signal conditioning and actuator drive loops in automotive body electronics, powertrain control, and chassis systems where the signal bandwidth stays below 100 kHz. Each amplifier draws 500 µA of supply current (1 mA total for both channels). At 12 V supply, the quiescent power dissipation is 12 mW — low enough that the 8-SOIC package dissipates the heat without thermal derating in still air up to 125°C ambient. The 30 mA per-channel output current drives typical automotive loads: a 5 V reference into a 10 kΩ ADC input (0.5 mA), a relay coil with a 200 Ω DC resistance (60 mA peak), or a piezo buzzer rated at 20 mA continuous. ## Input offset and bias: 3 mV offset, 20 nA bias — what they mean for precision sensing The 3 mV maximum input offset voltage (Vos) is the error floor for DC-accurate measurements. In a non-inverting gain-of-10 stage, this translates to 30 mV of output offset — acceptable for a 0-5 V throttle position sensor (1.2% of full scale) but marginal for a 0-100 mV shunt current monitor (30% error). The 20 nA input bias current (Iib) flows into the summing node and creates a voltage error across the feedback resistors. With 10 kΩ source impedance, the error is 200 µV — negligible compared to the 3 mV offset. But with 1 MΩ source impedance (piezo or high-impedance thermistor), the 20 nA bias generates 20 mV of additional offset, dominating the error budget. ## Active production and compliance documentation No stock-holding claim — each RFQ is handled individually with full lot traceability.","metaTitle":"Texas Instruments LM2904VQDRQ1 Op Amp, 700 kHz, -40 to 125°C","metaDescription":"Texas Instruments LM2904VQDRQ1 general-purpose op amp, AEC-Q100 qualified, 700 kHz GBW, 0.3 V/µs slew rate, -40°C to 125°C. Active production, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"Automotive, AEC-Q100","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.3V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"500µA (x2 Channels)","Number of Circuits":"2","Base Product Number":"LM2904","Current - Input Bias":"20 nA","Operating Temperature":"-40°C~125°C(TA)","Gain Bandwidth Product":"700 kHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"30 mA","Voltage - Supply Span (Max)":"26 V","Voltage - Supply Span (Min)":"3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.6500","priceTiers":[{"qty":1,"price":"$0.65000","currency":"USD"},{"qty":10,"price":"$0.56000","currency":"USD"},{"qty":25,"price":"$0.52320","currency":"USD"},{"qty":100,"price":"$0.41850","currency":"USD"},{"qty":250,"price":"$0.38860","currency":"USD"},{"qty":500,"price":"$0.32882","currency":"USD"},{"qty":1000,"price":"$0.25408","currency":"USD"},{"qty":2500,"price":"$0.23166","currency":"USD"},{"qty":5000,"price":"$0.21672","currency":"USD"},{"qty":12500,"price":"$0.21150","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/93b9ec3217f111faaa7e5a5c7385e80a.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LM2904VQDRQ1/alternatives.json"},"ai":{"faq":[{"question":"Will LM2904VQDRQ1 drop into a board originally laid out for LM6152ACMX/NOPB?","answer":"No — the LM6152ACMX/NOPB is a different part with a different pinout and package footprint. The LM6152 is an 8-SOIC with a rail-to-rail output stage and 80 MHz bandwidth, while the LM2904VQDRQ1 has a standard output stage and 700 kHz bandwidth. The two are not pin-compatible or drop-in replacements. A PCB redesign is required to swap between them."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM2904VQDRQ1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM2904VQDRQ1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}