{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM2904PWR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM2904PWR","canonicalUrl":"https://icboms.com/texas-instruments/LM2904PWR","factsUrl":"https://icboms.com/api/mcp/products/LM2904PWR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM2904PWR general-purpose operational amplifier, dual channel, 700 kHz gain bandwidth, 0.3 V/µs slew rate, 3 V to 26 V supply, 8-TSSOP package, Tape & Reel.","salesMarkdown":"The LM2904PWR: The part remains ROHS3 compliant per TI's last production run, so it still passes modern assembly restrictions without a waiver. ## 700 kHz GBW, 0.3 V/µs slew — signal conditioning fit Slew rate of 0.3 V/µs limits large-signal response: a 5 V peak-to-peak output step slews in about 17 µs, which caps the full-power bandwidth near 9 kHz. This matters if the output must track fast transients from a DAC or a comparator front-end. Supply span from 3 V to 26 V covers single-supply 5 V and 12 V rails as well as split supplies down to ±1.5 V — the wide compliance makes it a drop-in for existing 5 V or 24 V industrial designs without re-spinning the power rail. ## Dual-channel, 500 µA per amplifier — board-level integration Quiescent current of 500 µA per channel (1 mA total for both amplifiers) keeps the thermal contribution low — in a still-air environment the junction rise above ambient stays under 10°C even at 26 V supply, so no special copper pour or airflow is needed. Input bias current of 20 nA and input offset voltage of 3 mV are typical for a general-purpose bipolar stage — adequate for signals above a few millivolts with source impedances under 50 kΩ. For precision DC-coupled circuits below 1 mV the offset may need trimming or a chopper-stabilized alternative. It suits outdoor telecom cabinets, engine-bay sensor interfaces, and factory-floor PLC analog input stages. Output current capability of 40 mA per channel lets each amplifier drive a 2 kΩ load to within 1.5 V of the rails — enough to feed a downstream ADC input or a small relay coil through a series resistor.","metaTitle":"TI LM2904PWR Op Amp, 700 kHz, 0.3 V/µs, 8-TSSOP","metaDescription":"Texas Instruments LM2904PWR general-purpose op amp, 700 kHz GBW, 0.3 V/µs slew rate, 3-26 V supply, -40 to 125°C. Obsolete — sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Obsolete","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.3V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-TSSOP (0.173\\\", 4.40mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"500µA (x2 Channels)","Number of Circuits":"2","Base Product Number":"LM2904","Current - Input Bias":"20 nA","Operating Temperature":"-40°C~125°C(TA)","Gain Bandwidth Product":"700 kHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-TSSOP","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"26 V","Voltage - Supply Span (Min)":"3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.9300","priceTiers":[{"qty":1,"price":"$0.41000","currency":"USD"},{"qty":10,"price":"$0.33400","currency":"USD"},{"qty":25,"price":"$0.30520","currency":"USD"},{"qty":100,"price":"$0.22730","currency":"USD"},{"qty":250,"price":"$0.20596","currency":"USD"},{"qty":500,"price":"$0.17044","currency":"USD"},{"qty":1000,"price":"$0.12784","currency":"USD"},{"qty":2000,"price":"$0.11719","currency":"USD"},{"qty":6000,"price":"$0.11008","currency":"USD"},{"qty":10000,"price":"$0.10298","currency":"USD"},{"qty":50000,"price":"$0.10050","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/eb5c44b8b16da183125731c110fad94c.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LM2904PWR/alternatives.json"},"ai":{"faq":[{"question":"What is the slew rate of the LM2904PWR?","answer":"The slew rate is 0.3 V/µs. This limits large-signal response — a 5 V peak-to-peak output step takes approximately 17 µs to slew, capping the full-power bandwidth near 9 kHz."},{"question":"What compliance documentation does Texas Instruments provide for the LM2904PWR?","answer":"The LM2904PWR is ROHS3 compliant per TI's last production run."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM2904PWR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM2904PWR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-21T00:13:55.758Z","lastPublished":"2026-07-21T00:13:55.758Z","indexable":true}}