{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM2904LVQDRQ1","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM2904LVQDRQ1","canonicalUrl":"https://icboms.com/texas-instruments/LM2904LVQDRQ1","factsUrl":"https://icboms.com/api/mcp/products/LM2904LVQDRQ1","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM2904LVQDRQ1, Automotive AEC-Q100, dual general-purpose op-amp, 1 MHz GBW, 1.5 V/µs slew rate, 2.7 V to 5.5 V supply, 90 µA per channel, -40°C to 125°C, 8-SOIC.","salesMarkdown":"It operates from a single supply spanning 2.7 V to 5.5 V, making it directly usable on 3.3 V and 5 V rails without a separate regulator. Each channel draws 90 µA typical supply current while delivering a gain-bandwidth product of 1 MHz and a slew rate of 1.5 V/µs. The part is specified over the full automotive temperature range of -40°C to 125°C and comes in an 8-SOIC package. ## Supply range and 3.3 V single-supply operation The 2.7 V minimum supply span is the feature that answers the most common fit question: yes, this part runs on a single 3.3 V rail with margin. The 5.5 V maximum also covers 5 V ±10% automotive rails. No negative supply is needed; the common-mode input range includes ground, so it can sense near-zero signals in single-supply configurations. Rated for -40°C to 125°C ambient, the LM2904LVQDRQ1 is suited for under-hood automotive electronics, engine-control modules, transmission controllers, and industrial sensors that see extended temperature cycling.","metaTitle":"LM2904LVQDRQ1 Automotive AEC-Q100 Op-Amp, 1 MHz, 8-SOIC","metaDescription":"TI LM2904LVQDRQ1 dual general-purpose op-amp, AEC-Q100 qualified, 2.7 V to 5.5 V supply, 1 MHz GBW, 90 µA per channel, -40°C to 125°C.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"Automotive, AEC-Q100","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"1.5V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"90µA (x2 Channels)","Number of Circuits":"2","Base Product Number":"LM2904","Current - Input Bias":"15 pA","Operating Temperature":"-40°C~125°C(TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.4200","priceTiers":[{"qty":1,"price":"$0.42000","currency":"USD"},{"qty":10,"price":"$0.34400","currency":"USD"},{"qty":25,"price":"$0.31440","currency":"USD"},{"qty":100,"price":"$0.23400","currency":"USD"},{"qty":250,"price":"$0.21212","currency":"USD"},{"qty":500,"price":"$0.17554","currency":"USD"},{"qty":1000,"price":"$0.13165","currency":"USD"},{"qty":2500,"price":"$0.12068","currency":"USD"},{"qty":5000,"price":"$0.11337","currency":"USD"},{"qty":12500,"price":"$0.10605","currency":"USD"},{"qty":25000,"price":"$0.10350","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/6eeb2a2d992a0bcbaa06d65be4f5ef2b.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LM2904LVQDRQ1/alternatives.json"},"ai":{"faq":[{"question":"Is LM2904LVQDRQ1 a direct replacement for LM2904?","answer":"The LM2904LVQDRQ1 is a low-voltage variant of the classic LM2904. It is pin-compatible and functionally similar, but the supply range is reduced to 2.7 V to 5.5 V versus the original LM2904's wider range. For 3.3 V and 5 V designs, it is a drop-in replacement; for systems using supply voltages above 5.5 V, the original LM2904 or another variant is needed."},{"question":"Can LM2904LVQDRQ1 run on a single 3.3V supply?","answer":"Yes. The minimum supply span is 2.7 V, so a single 3.3 V rail provides adequate headroom. The input common-mode range includes ground, enabling single-supply operation without a negative rail."},{"question":"Is LM2904LVQDRQ1 RoHS compliant?","answer":"Yes, it is ROHS3 compliant."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM2904LVQDRQ1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM2904LVQDRQ1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}