{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM2904BRQDRQ1","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM2904BRQDRQ1","canonicalUrl":"https://icboms.com/texas-instruments/LM2904BRQDRQ1","factsUrl":"https://icboms.com/api/mcp/products/LM2904BRQDRQ1","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM2904BRQDRQ1, Automotive Grade, Dual General-Purpose Op-Amp, 1.2 MHz Gain Bandwidth, 0.5 V/µs Slew Rate, Push-Pull Output, 8-SOIC Package, AEC-Q100 Qualified.","salesMarkdown":"The gain-bandwidth product of 1.2 MHz sets the usable closed-loop bandwidth. For a gain-of-10 stage, expect a -3 dB point around 120 kHz — fine for filtering PWM tachometer signals or amplifying thermocouple outputs, but not for high-speed ADC drivers. The 0.5 V/µs slew rate limits large-signal response; a 5 V step settles in about 10 µs, which is adequate for low-frequency sensor interfaces but will distort fast edges above 50 kHz. Input bias current is 10 nA typical, and input offset voltage is 300 µV, both adequate for non-precision signal conditioning. The 1.27 mm pin pitch leaves room for manual soldering with a fine-tip iron. No moisture sensitivity level is listed, but standard SOIC bake-out at 125°C for 24 hours is safe if the parts have been exposed to ambient humidity.","metaTitle":"Texas Instruments LM2904BRQDRQ1 Dual Op-Amp, AEC-Q100","metaDescription":"Automotive-grade dual general-purpose op-amp from TI. AEC-Q100 qualified, 1.2 MHz GBW, 0.5 V/µs slew rate, 8-SOIC package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Grade":"Automotive","Series":"-","Package":"Bulk","Slew Rate":"0.5V/µs","Output Type":"Push-Pull","Mounting Type":"Surface Mount","Qualification":"AEC-Q100","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"500µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"10 nA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"1.2 MHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"26 V","Voltage - Supply Span (Min)":"3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/5322360ec9f1cf774657b8195f1abfd7.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LM2904BRQDRQ1/alternatives.json"},"ai":{"faq":[{"question":"Does the LM2904BRQDRQ1 meet AEC-Q100 qualification?","answer":"Yes, it is AEC-Q100 qualified, which means it has passed the automotive-grade stress tests for temperature cycling, ESD, and latch-up. This qualification is required for production BOMs in automotive ECUs and modules."},{"question":"What is the difference between LM2904BRQDRQ1 and LM2904BQDRQ1?","answer":"Both are dual general-purpose op-amps from TI in the same 8-SOIC package. The LM2904BQDRQ1 may have a different temperature grade or qualification level — confirm the specific datasheet for exact differences."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM2904BRQDRQ1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM2904BRQDRQ1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}