{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM2902MT/NOPB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM2902MT-NOPB","canonicalUrl":"https://icboms.com/texas-instruments/LM2902MT-NOPB","factsUrl":"https://icboms.com/api/mcp/products/LM2902MT%2FNOPB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LinCMOS series, LM2902MT/NOPB, quad general-purpose op-amp, 1 MHz gain-bandwidth, 1.5 mA supply, 3 V to 32 V supply range, -40°C to 85°C, 14-TSSOP.","salesMarkdown":"## 1 MHz GBW and 1.5 mA supply — the design trade-off With a gain-bandwidth product of 1 MHz and a supply current of 1.5 mA across all four amplifiers, this part targets low-to-moderate frequency loops where power budget matters more than speed. The 45 nA input bias current and 2 mV input offset voltage are typical for a general-purpose CMOS stage — adequate for DC-coupled signals but not precision instrumentation. ## 40 mA output drive per channel Each of the four amplifiers can source or sink 40 mA, enough to drive a downstream ADC input, a small relay coil through a transistor, or a 50-ohm line with moderate swing. The output stage is class-AB with no dead-zone crossover distortion typical of older bipolar quad amps. ## Industrial temperature range, surface-mount package","metaTitle":"LM2902MT/NOPB Texas Instruments LinCMOS Quad Op-Amp, 1 MHz","metaDescription":"Texas Instruments LM2902MT/NOPB quad general-purpose op-amp, LinCMOS series, 1 MHz GBW, 1.5 mA supply, -40°C to 85°C, 14-TSSOP.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"LinCMOS™","Package":"Tube","Slew Rate":"-","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"14-TSSOP (0.173\\\", 4.40mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"1.5mA","Number of Circuits":"4","Base Product Number":"LM2902","Current - Input Bias":"45 nA","Operating Temperature":"-40°C~85°C(TJ)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"14-TSSOP","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"32 V","Voltage - Supply Span (Min)":"3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.0203","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/760b95161fb34a996ab14789393eeeaa.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LM2902MT%2FNOPB/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between LM2902MT/NOPB and LM2902M?","answer":"The primary difference is the package: the LM2902MT/NOPB is in a 14-TSSOP surface-mount package, while the LM2902M typically comes in a 14-SOIC. Both are quad general-purpose op-amps with the same electrical specifications, so the choice is driven by PCB footprint and assembly process."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM2902MT-NOPB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM2902MT-NOPB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}