{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM2902LVIDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM2902LVIDR","canonicalUrl":"https://icboms.com/texas-instruments/LM2902LVIDR","factsUrl":"https://icboms.com/api/mcp/products/LM2902LVIDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM2902LVIDR, quad general-purpose op-amp, 1 MHz gain bandwidth, 1.5 V/µs slew rate, 90 µA supply per channel, 2.7 V to 5.5 V supply, -40°C to 125°C, 14-SOIC package.","salesMarkdown":"Input bias current is 15 pA typical, which is several orders of magnitude lower than the bipolar-input LM2902. That matters when the op-amp interfaces with high-impedance sensors (pH probes, photodiodes) where bias current flowing through the source resistance creates an offset voltage error. Input offset voltage is 1 mV typical — adequate for general-purpose signal conditioning but not precision instrumentation.","metaTitle":"LM2902LVIDR Quad Op-Amp, 1 MHz GBW, 90 µA/Ch, -40°C to 125°C","metaDescription":"Texas Instruments LM2902LVIDR quad general-purpose op-amp. 1 MHz GBW, 1.5 V/µs slew rate, 90 µA supply per channel. 2.7 V to 5.5 V supply.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"1.5V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"90µA (x4 Channels)","Number of Circuits":"4","Base Product Number":"LM2902","Current - Input Bias":"15 pA","Operating Temperature":"-40°C~125°C(TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"14-SOIC","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.1035","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/e92dc0888e9786ff486bcd523fe0b23f.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/LM2902LVIDR/alternatives.json"},"ai":{"faq":[{"question":"How does LM2902LVIDR compare to the standard LM2902?","answer":"The LM2902LVIDR is a pin-compatible, lower-power variant of the standard LM2902. The key difference is supply current: 90 µA per channel versus roughly 1 mA per channel for the standard part. The LM2902LVIDR also operates down to 2.7 V, whereas the standard LM2902 requires a minimum of 3 V. Gain-bandwidth and slew rate are similar between the two."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM2902LVIDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM2902LVIDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}