{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM2900N","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM2900N","canonicalUrl":"https://icboms.com/texas-instruments/LM2900N","factsUrl":"https://icboms.com/api/mcp/products/LM2900N","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM2900N quad general-purpose op-amp, 14-DIP through-hole package, 2.5 MHz gain bandwidth, 20V/µs slew rate, 4.4-32V supply, -40°C to 85°C, ROHS3.","salesMarkdown":"## Active production — still a design-in option The LM2900N: ROHS3 compliance is confirmed, so it meets the latest EU restriction-of-hazardous-substances directive without requiring a waiver or exemption review. ## Slew rate and bandwidth — what they mean for signal fidelity With a 20V/µs slew rate, the LM2900N can swing its output rail-to-rail at frequencies up to roughly 300 kHz before the slew-induced distortion exceeds acceptable levels — useful for fast-settling analog front-ends or pulse amplification where edge rates matter. The 2.5 MHz gain-bandwidth product sets the usable closed-loop bandwidth: at a gain of 10, the -3 dB point lands around 250 kHz, which covers most sensor conditioning, audio, and control-loop applications. ## Supply range and power budget for multi-channel boards The supply span runs from 4.4 V minimum to 32 V maximum, so the same part works on a 5 V logic rail, a 12 V industrial bus, or a ±15 V split supply — no need to qualify different op-amp variants for different board voltages. Total quiescent current for all four amplifiers is 6.2 mA typical, or about 1.55 mA per channel — low enough that a 24 V supply feeding a 4-channel filter bank dissipates under 150 mW in the op-amp itself. Each output can source or sink 18 mA, enough to drive a 2 kΩ load to within a volt of the rails or to charge a 100 pF sampling capacitor in under 10 ns. ## Package and temperature — breadboard to production Housed in a 14-pin DIP with 0.300-inch row spacing (14-DIP, 7.62 mm body width), the LM2900N fits standard breadboards and through-hole prototyping sockets, and the 14-PDIP supplier package designation means the same footprint serves both TI and second-source parts. The -40°C to +85°C industrial temperature range covers most factory-floor, outdoor telecom, and automotive-cabin environments without needing a more expensive extended-range part.","metaTitle":"Texas Instruments LM2900N Quad Op-Amp, 20V/µs, 14-DIP","metaDescription":"Texas Instruments LM2900N quad general-purpose op-amp. Active production, 2.5 MHz GBW, 20V/µs slew rate, 4.4-32V supply, -40°C to 85°C. 14-DIP through-hole.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"20V/µs","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"14-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"6.2mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"30 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"2.5 MHz","Supplier Device Package":"14-PDIP","Current - Output / Channel":"18 mA","Voltage - Supply Span (Max)":"32 V","Voltage - Supply Span (Min)":"4.4 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.66","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.66000","currency":"USD"},{"qty":10,"price":"$0.57700","currency":"USD"},{"qty":25,"price":"$0.54200","currency":"USD"},{"qty":100,"price":"$0.44250","currency":"USD"},{"qty":250,"price":"$0.41100","currency":"USD"},{"qty":500,"price":"$0.34980","currency":"USD"},{"qty":1000,"price":"$0.27984","currency":"USD"},{"qty":2500,"price":"$0.25360","currency":"USD"},{"qty":5000,"price":"$0.24750","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7cff4031a045d95284982e16c402fe6e.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to LM2900N?","answer":"The part is unique in its combination of 20V/µs slew rate, 2.5 MHz GBW, and quad 14-DIP package. If a second source is needed, parametric matching against the supply range and slew rate is the starting point — the 14-DIP footprint is standard, so any quad op-amp in that package is footprint-compatible, but function-compatibility requires checking the specific ratings."},{"question":"What compliance documentation does Texas Instruments provide for LM2900N?","answer":"Texas Instruments confirms ROHS3 compliance for the LM2900N. Standard documentation includes the RoHS certificate of compliance and the material declaration. No UL or IEC certification is listed in the available records."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM2900N","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM2900N when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}