{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LM10CH/NOPB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"LM10CH-NOPB","canonicalUrl":"https://icboms.com/texas-instruments/LM10CH-NOPB","factsUrl":"https://icboms.com/api/mcp/products/LM10CH%2FNOPB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LM10CH/NOPB general-purpose op-amp, TO-99-8 metal can package, through-hole mounting, 300µA supply current, 1.1V to 40V supply span, single circuit.","salesMarkdown":"## Package and integration fit The LM10CH/NOPB ships in a TO-99-8 metal can — a hermetic, through-hole package that demands a 0.100-inch pitch circular footprint on the PCB. The metal can provides a shielded cavity and better thermal conduction than plastic DIP, but the 8-lead circular layout is non-standard for modern SMD assembly lines; expect manual or selective-wave solder. Rated for the 0°C to 70°C commercial temperature range, this part suits indoor instrumentation, bench-top equipment, and controlled-environment control loops — not engine bays or outdoor enclosures without climate control. ## Supply flexibility and power budget The 1.1 V minimum supply span lets this op-amp run directly from a single lithium cell or a 1.2 V NiMH battery, while the 40 V maximum covers 24 V industrial rails with margin. That 36:1 span ratio is unusual — most general-purpose parts top out at 36 V and need 3 V minimum. At 300 µA supply current, the LM10CH/NOPB fits loop-powered 4-20 mA transmitters and battery-backed signal conditioning where every microamp counts. The 20 mA output per channel drives a small relay, an LED indicator, or the input of a downstream ADC directly. ## DC performance for general-purpose signal chains Input offset voltage is 500 µV — adequate for 8- to 10-bit accuracy over a 5 V span, but a precision application requiring sub-100 µV offset should look at the OPAx188 family. Input bias current of 12 nA is fine for voltage dividers in the 10 kΩ range; for a 1 MΩ source impedance the 12 nA drops 12 mV of offset error. Single-circuit package means one op-amp per TO-99 can. If the BOM calls for multiple channels, the per-channel board area is higher than a quad SMD part — plan the layout accordingly. ## Lifecycle and sourcing posture Sourced to order against your BOM quantity; current pricing and lead time confirmed at RFQ. The Bulk package means no reel or tape — suitable for prototype, repair, and low-volume production runs.","metaTitle":"Texas Instruments LM10CH/NOPB Op-Amp, TO-99-8, 300µA","metaDescription":"Texas Instruments LM10CH/NOPB general-purpose op-amp in TO-99-8 metal can. Active production, ROHS3 compliant. 300µA supply, 1.1V to 40V span. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Bulk","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"TO-99-8 Metal Can","lifecycle_stage":"eol_hot","Current - Supply":"300µA","Number of Circuits":"1","Current - Input Bias":"12 nA","Operating Temperature":"0°C ~ 70°C","Voltage - Input Offset":"500 µV","Supplier Device Package":"TO-99-8","Current - Output / Channel":"20 mA","Voltage - Supply Span (Max)":"40 V","Voltage - Supply Span (Min)":"1.1 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$20.58","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$20.58000","currency":"USD"},{"qty":10,"price":"$18.91100","currency":"USD"},{"qty":25,"price":"$18.12760","currency":"USD"},{"qty":100,"price":"$15.97180","currency":"USD"},{"qty":250,"price":"$15.18788","currency":"USD"},{"qty":500,"price":"$14.20802","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a478f18f50f7977b65dccf9d32e984a9.pdf","sourceUrl":null},"ai":{"faq":[{"question":"How can I order LM10CH/NOPB and check availability?","answer":"This part is sourced to order through independent distribution. Submit an RFQ for current pricing, lead time, and quantity confirmation. The Bulk package is well suited for small-to-medium quantity orders."},{"question":"Can LM10CH/NOPB replace TLV9351IDCKR without board changes?","answer":"No. The TLV9351IDCKR is a surface-mount SC-70 package with rail-to-rail output and 3.5 MHz bandwidth. The LM10CH/NOPB is through-hole TO-99 with no rail-to-rail output. A board redesign is required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/LM10CH-NOPB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/LM10CH-NOPB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}